Previous Next
ITEM DETAILS
Meter Reading
2,847 Hours
Serial #
132.5" wide blade, shoe width 26", Komatsu 4D102E-1 eng, 3spd torqflow trans, Cab, A/C, heater, 3 shank ripper attachment

Inspection Report



Please note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.
Summary Protected by IronClad Assurance Protected by IronClad Assurance®
This machine appears to be in good to very good overall condition. Cosmetically there is only normal wear with no major damage. Mechanically the engine runs fine, the transmission and hydraulics are responsive and the undercarriage appears to be in good to fair condition. See the report for further details.


General Appearance
Description Rating Details  
operators manual Yes
cab/operator station
sheet metal (fiberglass) condition Minor damage to the lower front radiator guard. Hard nose has been replaced.
paint Faded and worn with normal work scratches.


Operator Station
Description Rating Details  
steps/ladders
hand rails
mirrors
glass
seats/armrests Click here to open photos and videos of this item.  
seat belts
horn INOPERABLE
exterior lights
engine warning lights/alarms
back up alarm
oil pressure Normal - Warning light
gauges Click here to open photos and videos of this item.  
hour meter operational Yes
air conditioner Does not blow cold.
heater
hydraulic controls Click here to open photos and videos of this item.  
steering controls Click here to open photos and videos of this item.  
powertrain controls
control lock lever
roll over certification label Yes
limited function check Main components checked seem to be in normal functioning condition.
(4)


Engine
Description Rating Details  
hour meter 2847 hours
make & model Komatsu - Model SD125E-2 Click here to open photos and videos of this item.  
serial # Tag not seen
emission control label None seen
fuel type Diesel
starter
battery
turbocharger No visible leaks. Click here to open photos and videos of this item.  
exhaust system Top of the stack is bent. Click here to open photos and videos of this item.  
cylinder head gasket
oil dipstick tube & bonnet
blowby (checked at idle) Minimal amount
valve cover gasket
oil pan & gasket
injector pump
fuel line & injector leaks No visible leaks.
water pump
radiator No visible leaks.
limited function check Starts easy, runs smooth and sounds good.
(3)


Powertrain
Description Rating Details  
transmission type Torqflow - 3 speeds forward and reverse.
torque converter
steering clutches
steering brakes
drive/propel motors NA
final drives No visible leaks.
limited function check Shifted through the gears and steered good.


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
push arm/C-frame condition Click here to open photos and videos of this item.  
push arm/C-frame rear pivot points Minor wear.
tilt/angle linkage pins & bushings Minimal wear.
blade trunnions or bushings Minor wear. Click here to open photos and videos of this item.  
blade lift linkage pins & bushings Minor wear. Click here to open photos and videos of this item.  
equalizer bar
pivot shafts
roller frame
belly pans Center pan is bent in.
limited function check Functions well with minor wear throughout.
(3)


Hydraulics
Description Rating Details  
pumps
valves
hoses At least 1 bad spot on the right side blade cylinder hose.
cylinders Click here to open photos and videos of this item.  
cylinder pins and bushings Minor wear.
limited function check Functions good and strong with minor wear.
(1)


Undercarriage
Undercarriage wear percentages are estimated averages only. These percentages are based on the average measurements of the undercarriage components and may vary due to the machine application, brand of parts, or OEM specifications available.
Description Rating Details  
track tensioners
shoe width 26"
overall width of tracks (outside to outside of track shoes) 100" Click here to open photos and videos of this item.  
grouser height 40% worn Click here to open photos and videos of this item.  
pins and bushings rotated No
track link height 40% worn Click here to open photos and videos of this item.  
pins & bushing wear (internal) 20% worn
pins & bushing wear (external) 25% worn
carrier rollers 45% worn Click here to open photos and videos of this item.  
track rollers 15% worn
front idler height 40% worn
rear idler height NA
sprockets Click here to open photos and videos of this item.  
limited function check Ran out fine with normal wear.
(5)


Specialty Equipment
Description Rating Details  
blade condition 132 1/2" wide with normal wear. Click here to open photos and videos of this item.  
cutting edge condition Reversible edge is ready to be turned. Click here to open photos and videos of this item.  
ripper condition 3 shank ripper has little wear at the pivot points. Click here to open photos and videos of this item.  
picture Click here to open photos and videos of this item.  
(4)
 
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.