Previous Next
ITEM DETAILS
Meter Reading
2,812 Hours
Serial #
new paint, 98" wide PAT blade, shoe width 16", CAT 3204 eng, 3spd powershift trans, OROPS

Inspection Report



Please note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.
Summary Protected by IronClad Assurance Protected by IronClad Assurance®
This machine is in good condition. Cosmetically the unit very straight with new paint. The engine and powertrain are responsive with good power output. The undercarriage is almost ready for some repairs. See the report for further details.


General Appearance
Description Rating Details  
operators manual No
cab/operator station Click here to open photos and videos of this item.  
sheet metal (fiberglass) condition Click here to open photos and videos of this item.  
paint New
(2)


Engine
Description Rating Details  
hour meter 2812 - Original hours unknown
make & model Cat 3204
serial # 7YJ05711
emission control label No
fuel type Diesel
starter
battery
turbocharger NA
exhaust system Click here to open photos and videos of this item.  
cylinder head gasket
oil dipstick tube & bonnet
blowby (checked at idle) Minor blowby present.
valve cover gasket Click here to open photos and videos of this item.  
oil pan & gasket
injector pump Click here to open photos and videos of this item.  
fuel line & injector leaks Click here to open photos and videos of this item.  
water pump
radiator
limited function check Engine operates normally with no unusual noises and very good power output.
(4)


Powertrain
Description Rating Details  
transmission type Power shift - 3 forward, 3 reverse speeds
torque converter
steering clutches
steering brakes
drive/propel motors NA
final drives
limited function check Shifted smoothly through all ranges with no unusual noises present.


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
push arm/C-frame condition
push arm/C-frame rear pivot points Moderate play present.
tilt/angle linkage pins & bushings Minor play present. Click here to open photos and videos of this item.  
blade trunnions or bushings Minor play present. Click here to open photos and videos of this item.  
blade lift linkage pins & bushings Minor play
equalizer bar NA
pivot shafts NA
roller frame
belly pans
limited function check Operates properly minor wear present.
(2)


Hydraulics
Description Rating Details  
pumps Quiet in operation.
valves
hoses
cylinders
cylinder pins and bushings Minor play present.
limited function check Hydraulic system is responsive with good power.


Undercarriage
Undercarriage wear percentages are estimated averages only. These percentages are based on the average measurements of the undercarriage components and may vary due to the machine application, brand of parts, or OEM specifications available.
Description Rating Details  
track tensioners
shoe width 16"
overall width of tracks (outside to outside of track shoes) 72"
grouser height 43% worn - One track shoe is bent upward. Click here to open photos and videos of this item.  
pins and bushings rotated No
track link height 100% worn
pins & bushing wear (internal) Lubricated track wear percentages unavailable.
pins & bushing wear (external) 57% worn
carrier rollers 55% worn Click here to open photos and videos of this item.  
track rollers 86% worn - Rollers are contacting the pin boss area of track link. Click here to open photos and videos of this item.  
front idler height 100% worn Click here to open photos and videos of this item.  
rear idler height NA
sprockets Noticeable wear Click here to open photos and videos of this item.  
limited function check Operation appears normal.
(5)


Operator Station
Description Rating Details  
steps/ladders
hand rails
mirrors
glass NA
seats/armrests Rip in the seat cushion. Click here to open photos and videos of this item.  
seat belts
horn
exterior lights
engine warning lights/alarms NA
back up alarm
oil pressure Normal - 25 PSI indicated at idle.
gauges
hour meter operational No
air conditioner NA
heater NA
hydraulic controls
steering controls Right steering linkage missing return spring. Click here to open photos and videos of this item.  
powertrain controls Click here to open photos and videos of this item.  
control lock lever
roll over certification label Yes
limited function check Right steering lever missing a return spring, all other controls operational with minor wear present, machine responds well to control inputs.
(3)


Specialty Equipment
Description Rating Details  
blade condition Width 98" PAT blade Click here to open photos and videos of this item.  
cutting edge condition Has been turned. Click here to open photos and videos of this item.  
(2)
 
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.