Distiller C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Burner C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Distillation tower height - 25ft, Marley Aquatower Model 492 Cooling Tower - SPX Cooling Technologies, ARO double diaphragm pumps - Ingersoll Rand, Feed pump, Product pump, Waste pump, Flojet pumps - Xylem, Dilutive water pump, Level controllers - Kimray, Level control valves - Kimray, Glycol circulating pumps - MP Pumps, 5 HP HTO 120, 7.5 HP HTO 180, Oil circulating pump - MP Pumps, 7.5 HP HTO 180, Vacuum pump LEM series - SIHI, 4 pass heat exchangers, Shell and tube, 2 heat exchangers in series, Length - 10ft, Diameter - 12.8125in., Condenser - American Industrial Heat Transfer, 2 pass shell and tube, Length - 7ft, Diameter - 8in. , Heat exchanger - American Industrial Heat Transfer, 2 pass shell and tube, Cool glycol finished product with cooling tower water, Length - 3ft , Diameter - 6.25in., PLC, Dir

Skid width - 8ft3in., Base to the top of distillation tower - 25ft, Base to the top of evaporator - 13ft9.5in., Marley Aquatower Model 492G Cooling Tower - SPX Cooling Technologies, ARO double diaphragm feed, product and waste pumps - Ingersoll Rand, Flojet pumps for: Tower Reflux/Dilutive Water/Seal Water - Xylem, Level controllers - Kimray, Level control valves - Kimray, Temperature controllers - Kimray, Glycol circulating pump 5 HP HTO 120 - MP Pumps, Oil circulating pump 5 HP HTO 120 - MP Pumps, Vacuum pump Model TRMB 25-30 - Travaini, 4 pass heat exchanger shell and tube - Perry - Length - 12ft GRU-2000-V2.5in. - O.D. - 10.75in. - Tubes (72) - 3/4in. O.D. x 18 GA. x 10ft LG., Condenser - Perry - Length - 10ft2in. - O.D. - 8.625in. - Tubes (55) - 3/4in. O.D. x 18 GA. x 8ft LG., Pneumatic control valves in panel with Isonic 4000 series manifold - Mead Fluid Dynamics, Temperature and Process Controller - Omega, Natural gas burner - Maxon - Series 67 Tube-O-Flame - 8

Capacity: 800 Kn Live Load (81 Tons) Size: Width: 48ft (14.755m) X Length: 60ft (18.8m) CL-800 (Non-Composite) Bridges were Fabricated by Rapid-Span and are Engineer Stamped 6 - 18.29m Long Steel Girders c/w Bolted Bracing, 18 - Precast Concrete Non-Composite Deck Panels, Thrie Beam Railings & Posts (TL-2 Barrier) c/w W-beam and All Associated Hardware Required to Assemble Steel Girders and Precast Deck. Bridge Designed to Meet CL-800 Design Loading DESIGN CODE: CAN/CSA-S6-14. In Service for 2 Years. Bridge Currently Disassembled and in Storage

40 hp Engine, Max Operating Press. 100 Psi,575 Volt, 3 Phase

Tier 3, 2006 US EPA Label, Honda GX-240 1 Cylinder Gasoline Engine

Tier 3, 2005 US EPA Label, Honda GX280 1 Cylinder Gasoline Engine

Efco forms. Flat (parapet) Sections - Qty of 20. Curved sections (Barrier) - Qty 10. Top Form Extensions - Qty 10. Associated Hardware and Accessories Included. all form are 10 Ft long.

Liquid Seperator, Heat Exchanger, Service Liquid Valve, Temperature Regulating Valve

230 V, 3 Phase, 60 Hz

2.1 kW 3 Phase Motor

7/8" Thick

7/8" Thick

Centrifugal Evac Pump:
2021
50/60 HZ
380/440 V

Motor:
50/60 HZ
240 Volts
850 RPM
36.5 AMPS
10 HP

Each Durst drive w/ (1) Rexroth model: R902108017/02 AA11VL0260LRDDH211L hyd pump (60 GPM) Each w/ (1) Rexroth model: AA11VL0130DRG/10L NSD62N00-ES hyd pump (60 GPM) - Each w/ (1) Rexroth model: RG02120203/06 type AA11VL0260LRDH2/11L-NSD62K01 (60 GPM) - HPU 5000 PSI WP each drive 180+ GPM per drive - Complete w/ all low pressure suction piping; w/ Parker high pressure; (7) high pressure filter system (4 per drive) - HPU is all installed in 20 FT. container w/ dual side doors; end doors; w/ forklift slots - Unit is insulated - Container has certified shipping plate - HPU was originally powered by (2) Detroit 14LTR series 60 engines; has dual drive line guards - (2) hydraulic cylinders: 12" rod x 46 FT. OAL 10" rod x 46 FT. OAL; both 5K PSI WP

(5) 120' Cables, (15) Braces

Baldor 1 hp 3 Phase Motor, extensions

Honda Gasoline Engine, (1) Free Standing Base, (1) Set of Stairs, (14) Sections of Hand Rails, (2) 10 ft Platform Sections, (2) 6 ft x 8 in Platforms, (8) Outriggers, (1) Safety Cage, 45 ft of Tower Sections

(15) 5 ft Mast Tower, (3) 10 ft Work Platforms, (3) 3 ft 4 in Work Platforms, (1) Forward Extension Kit, Misc. Ties

To Fit trench box

4' 8" Wide x 12' 4" Long, 7' 2" High, Lift height: 130 Feet, 480 V, 60 Hz, 3 Phase, Vertical Speed: 175 ft/min, Galvanized Mast, (5) Wall Tie-In, (4 ) Landing Gates, 170' Power Cable, (1) Cable Trolley, Manuals

To Fit RITCHFIELD EQUIPMENT 1.8 cube tank mud vacumm, 25 hp 3 Phase Motor, Fruitland vacuum Compressor, explosion proof, float shut off, 480 volt 3 phase

2) 7/8 In to 5-1/2 In buggy heads,( 2)10 In and (1)12 In coil, 10 spare cables, all spare parts

1 Piece 42 ft 4 in and 1 Piece 37 ft 10 in Total 80 ft 2 in

1 piece 21 ft, 1 piece 12.5 ft, Total 33 ft 6 in

2 pieces 21 ft 2 in long, Total length 42 ft 4 in w/ Coating Certs

125 PSI, Hoses

HL93 Rating

2010 US EPA Label, Honda GX620 & GX630 20 hp Gasoline Engine, Includes Three (3) Mast Climber Units (One Stationnary Unit and Two Units with Chassis Base on Wheels), Single Mast Platform Length 40 feet, Maximum Anchored Mast Height 150 feet, Maximum Capacity 6000 lbs ea., Hydraulic Operating Pressure 2900 PSI, Hydraulic rack-and-pinion drive system, Lift Speed 39 feet/minute. Includes 32 x 4ftx4ft deck parts, 100 x wall and std mast parts (some needs repair), 34 x rails parts and additional mounting and utility hardware

3 Phase Motor

To Fit HOT ROD 18-11, 2x HotRot reactor units with control panels. Shredding system with loading hopper, 2x 10hp drive motors, and loading auger, 5 m3 infeed hopper with incline and cross-feed augers and monitoring platform, Horizontal and incline output augers with screener chute attachment. 1/2" minus screening trommel with 1yd3 wheeled cart for catching and unloading screened materials (custom Wilmar Wrangler quick attachment - could be modified for skid steer quick attachment plate). 2x 500 cfm biofilters including exhaust fans and monitors

Bridge Length 50 Ft X 18 Ft Wide When Bolted Together Side By Side. 3 Ft Tall X 1/2 In Thick I Beam Support Frame, 4 In X 4 In Galvanized Risers Under Decking. 3 In X 8 In Brand New Treated Wood Decking Mounted With Galvanized Carriage Bolts

69pcs x Integrated railing rod 17pcs x Base P. Round 75cm 97pcs x Frame H.70cm 14pcs x Frame H. 70cm (Cut) 10pcs x Shelves 70cm with parapet H120cm 63pcs x Painted Round Base 45cm 6pcs x Painted round base 25cm 92pcs x CETA Railing 180cm 10pcs x Headboard frame 70cm 17pcs x Headboard frame 70cm 1pc x Frame holder for 70cm frame 19pcs x Electro-galvanized ladder 10pcs x painted pin 47pcs x Railing Rectangular 175x70 96pcs x Galvanized Toe Rail 180cm 18pcs x Horizontal joint 4 Bul. 7pcs x Joint type Dalmine 8pcs x Swivel Joint 2pcs x connecting elements for driveway beams 60cm 13pcs x Tab. with BS50x180 centre bot 64pcs x Panel cm 33x180 6pcs x Board with side hatch 66x180cm 47pcs x buffer board 15x180cm 3pcs x Tablet 50x80 ceta type 13pcs x Beams 50x180 triple braced 50pcs x Beams 50x180 double braced 30pcs x 60cm U-piece with holes