Previous Next
Ends
Subject to Offers
 
  
Buy Now Price
US $10,000
You will confirm this action on the next page. How it works. How Make Offer works.
ITEM DETAILS
Meter Reading
2,340 Hours
Serial #
Canopy, 1 ft Cutting Width, 12 in Grinding Head

Inspection Report



Please note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.


General Appearance
Description Rating Details  
Paint Click here to open photos and videos of this item.  
Sheet Metal (Fiberglass) Condition Click here to open photos and videos of this item.  
Steps/Ladders Click here to open photos and videos of this item.  
Hand Rails Click here to open photos and videos of this item.  
(10)


Safety
Description Rating Details  
Travel Alarm Inoperable
Horn Operational
Seat Belts Not equipped
Current Safety Manual No
Current Operator/Maintenance Manual No


Control Station
Pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
Seats/Armrests Click here to open photos and videos of this item.  
Steering Controls Click here to open photos and videos of this item.  
Hydraulic Controls Leaking Click here to open photos and videos of this item.  
Drivetrain Controls Click here to open photos and videos of this item.  
Dash Console Click here to open photos and videos of this item.  
Engine Oil Pressure Click here to open photos and videos of this item.  
Warning Lights Operational
Gauges tach, battery, oil psi gauges are inoperable Click here to open photos and videos of this item.  
Hour Meter (pre-inspection) 2340.1 hrs Click here to open photos and videos of this item.  
Hour Meter 2340 hrs, Operational hour meter - No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed. Click here to open photos and videos of this item.  
Limited Function Check The main components are in place and operational as noted. Click here to open photos and videos of this item.  
(13)


Engine
Description Rating Details  
Blow-by (subjective visual observation) Visible Click here to open photos and videos of this item.  
Starter Operational
Exhaust System Click here to open photos and videos of this item.  
Radiator Click here to open photos and videos of this item.  
Oil Leaks No dripping leaks
Engine - Left Side Click here to open photos and videos of this item.  
Engine - Right Side Click here to open photos and videos of this item.  
Limited Function Check The engine started and ran. Click here to open photos and videos of this item.  
(6)


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
Drive/Propel Motors Dripping Leak, There is a leak from the motor. Click here to open photos and videos of this item.  
Final Drives Click here to open photos and videos of this item.  
Limited Function Check The drivetrain was operational.
Rotor Drive Clutch
Rotor Drive Pulleys Click here to open photos and videos of this item.  
Rotor Drive Belt Click here to open photos and videos of this item.  
Rotor Final Drive Click here to open photos and videos of this item.  
Limited Function Check The main chassis components functioned.
Main Frame Click here to open photos and videos of this item.  
Rotor Mandrel Click here to open photos and videos of this item.  
Holders and Cutting Bits Click here to open photos and videos of this item.  
Roller Frame Legs Click here to open photos and videos of this item.  
Limited Function Check The main components functioned with minor wear throughout.
Tire Size 12x12x22 front tires, 28x12x22 rear tires Click here to open photos and videos of this item.  
Tire Condition Click here to open photos and videos of this item.  
Wheel Condition
Wheel Studs
(18)


Hydraulics
See photos for condition
Description Rating Details  
Pumps (Hydraulics) Click here to open photos and videos of this item.  
Hydraulic Motors Dripping leak Click here to open photos and videos of this item.  
Valves
Hydraulic Tank Click here to open photos and videos of this item.  
Hoses Click here to open photos and videos of this item.  
Cylinder(s) Click here to open photos and videos of this item.  
Cylinder Pins and Bushings
Limited Function Check The hydraulic system was operational.
(14)
 

Oil Sample Analysis
  engine
date of analysis Oct 04, 2022
Silicon 10.28 PPM
Tin 0 PPM
Silver 0.02 PPM
Aluminum 2.99 PPM
Chromium 0.29 PPM
Lead 0.4 PPM
Copper 1.9 PPM
Nickel 0.35 PPM
Iron 18 PPM
Glycol NEG
Water NEG
Fuel <5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Related Equipment (Both Live and Sold)
12 ft 2 in Cutting Width, 12 in ...
12 ft 2 in Cutting Width, 12 in Milling Depth, Water System, 42 in Discharge Conveyor, Triple Grouser Track Shoes w/Rubber Inserts, Additional 7 ft Drum
6 ft 8 in Cutting Width, 12 in ...
6 ft 8 in Cutting Width, 12 in Milling Depth, Water System, 30 in Discharge Conveyor, Grade Control System, Air Compressor, 12 in Track Shoes w/Rubber Pads
Canopy, 2008 US EPA Label, 7 ft 4 ...
Canopy, 2008 US EPA Label, 7 ft 4 in Cutting Width, 3 in Milling Depth, Water System, 32 in Discharge Conveyor, 12 in Triple Grouser Track Shoes w/Rubber Inserts
2007 US EPA Label, 7 ft 2 in ...
2007 US EPA Label, 7 ft 2 in Cutting Width, 14 in Milling Depth, Water System, 36 in Discharge Conveyor, 12 in Triple Grouser Track Shoesw/Rubber Pads