Print Brochure2000 Cora Lynn Drilling CLD55-90 Rig on 2001 Kenworth T800 Drill Truck
Item Number
12434028
Location
Ponoka, Alberta, Canada.
Marketplace
Marketplace-E
Ends
Subject to Offers
Sold for
You will confirm this offer on the next page.
How Make Offer works.
Add to Watch List
12 watchers
ITEM DETAILS
Mileage
333 Hours
VIN
Mud Drill, Winch, Straight Down Outriggers, Rear Outriggers, Cat C15 6 Cylinder 14.6 L Diesel 450 hp Engine, Positive Air Shutoff, 332 Engine hrs, Air Conditioner, Cruise Control, Engine Brake, Eaton Fuller RTLO-16918B 18-Speed Manual Transmission, Double Differential Locks, Spicer DS462P Drive Axles, 4.56:1 Axle Ratio, 37866 kg GVWR, Air Ride Cab, steel, 425/65R22.5 Front Tires, 11R24.5 Rear Tires, Dual Steering Boxes, Double Frame, Rubber over Walking Beam Suspension, 346 in Wheelbase, PTO, Drill dept -500 meters = 1,650 feet, Hydraulic Top Drive, Mast: Range 111-40,000 lbs -17,750 daN, (2) 5 1/2 x 8 Gardner Denver Duplex hydraulically driven Mud Pumps, 5000ft-lbs Torque, Main Winch 30,000 lbs, Wireline Winch, Winch and Jib Boom, Equipped with Coring Assembly and Wire Line Retrieval System.
Inspection Report
Please note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.
Model Description
| Description | Details |
General Appearance
|
||||||||||||||||||||||||||||||||||||
Click here to open photos and videos of this item.
Engine
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cab
Underbody
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Control Station - Upper
|
||||||||||||
Hydraulics
|
||||||||||||||||||||||||||||||||||||||||||||
Chassis
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
Oil Sample Analysis
| hydraulic | engine |
| Aluminum | 0.04 PPM | 1.35 PPM |
| Chromium | 0 PPM | 0.09 PPM |
| Copper | 27.23 PPM | 4.23 PPM |
| date of analysis | Oct 07, 2024 | Oct 07, 2024 |
| Fuel | N/A | <5% |
| Glycol | N/A | NEG |
| Iron | 0.61 PPM | 13.02 PPM |
| Lead | 0.88 PPM | 0.74 PPM |
| Nickel | 0.34 PPM | 0.53 PPM |
| Silicon | 0.89 PPM | 5.39 PPM |
| Silver | 0 PPM | 0 PPM |
| Tin | 0.79 PPM | 0.25 PPM |
| Water | N/A | NEG |
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Important Information
Payment Details
- Within 7 days after the auction, the buyer must submit full payment, including applicable taxes and fees to avoid late fees.
- This item may be subject to Alberta sales tax.
- A $115 documentation fee will be charged on each titled item purchased if it is located in the United States, Canada or Mexico.
- Payment can be made by wire transfer (recommended) or credit card (additional fee will apply).
- A transferable title will be sent to the buyer by express mail or similar service within 15 business days of the auction. Buyer is responsible for vehicle registration.
- All bids cannot be retracted and are binding until 2 business days after the auction ends. Failure to make full payment will result in a Default Fee.
| Final Selling Price | Transaction Fee |
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Shipping & Pick Up Details
- Buyer is responsible for all costs related to transporting the item.
- Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
Pickup Terms
Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item(s).
Hours of operation are subject to change for Holiday Schedules
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Item Release to pick the item up.
Financing
Questions
| Customer Care Agents are available Monday to Friday, 6 a.m. to 5 p.m. (Pacific Time) |
||
| Phone | 800-211-3983 | |
| Fax | 888-433-3467 | |
| customercare@ritchiebros.com | ||
PreviousRelated Equipment (Both Live and Sold)
Return To Inspection