Previous Next
ITEM DETAILS
Meter Reading
2,091 Hours
Serial #

Inspection Report



Please note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.
Summary Protected by IronClad Assurance Protected by IronClad Assurance®
This machine appears to be in good condition overall. The engine and hydraulics seem to be in sound operating condition. There is minor body damage and the paint is good.


General Appearance
Description Rating Details  
sheet metal (fiberglass) condition Minor damage around upper windshield and the left side of the A/C unit. Click here to open photos and videos of this item.  
paint Scraped and scratched. Click here to open photos and videos of this item.  
(2)


Operator Station
Description Rating Details  
steps/ladders
hand rails 1 slightly bent Click here to open photos and videos of this item.  
mirrors Click here to open photos and videos of this item.  
glass The front glass is cracked. Click here to open photos and videos of this item.  
seats/armrests Click here to open photos and videos of this item.  
seat belts
horn
control lock lever Click here to open photos and videos of this item.  
hydraulic controls Click here to open photos and videos of this item.  
steering controls
powertrain controls Click here to open photos and videos of this item.  
oil pressure The warning light went out when the engine started.
exterior lights operational Yes Click here to open photos and videos of this item.  
engine warning lights operational Yes Click here to open photos and videos of this item.  
travel alarm operational Yes
gauges operational Yes Click here to open photos and videos of this item.  
hour meter operational Yes
air conditioner operational Yes Click here to open photos and videos of this item.  
heater operational Yes
limited function check The components that were checked performed properly with wear and damage noted above.
(11)


Engine
Description Rating Details  
hour meter 2091 Click here to open photos and videos of this item.  
make & model Cat 3116 Click here to open photos and videos of this item.  
serial # 4TF51272
emission control label Yes
starter
battery Click here to open photos and videos of this item.  
turbocharger Click here to open photos and videos of this item.  
exhaust system Click here to open photos and videos of this item.  
cylinder head gasket
oil dipstick tube & bonnet
blowby (checked at idle) Minor
valve cover gasket
oil pan & gasket
injector pump
fuel line & injector leaks None Seen
water pump
radiator
limited function check Started easily and ran well with no unusual noises. See the oil sample analysis for the engine.
(5)


Powertrain
Operational test is limited to low speed in a confined flat area without load. Full transmission shifting and range functionality cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Description Rating Details  
transmission type Hydrostatic
service brake Click here to open photos and videos of this item.  
drive/ propel motors
final drives
limited function check Functioned well when checked without a load.
(1)


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
lift arm condition
upper lift arm pins & bushings Minor wear
tilt linkage pins and bushings Minor wear Click here to open photos and videos of this item.  
bucket pins & bushings Minor wear Click here to open photos and videos of this item.  
equalizer bar Undetermined
pivot shafts
roller frame Click here to open photos and videos of this item.  
belly pans
limited function check The main components functioned well with minor wear throughout.
(3)


Hydraulics
Description Rating Details  
pumps
valves
hoses
cylinders
cylinder pins and bushings Minor wear Click here to open photos and videos of this item.  
limited function check Performed well when checked without a load. Click here to open photos and videos of this item.  
(2)


Undercarriage
Undercarriage wear percentages are estimated averages only. These percentages are based on the average measurements of the undercarriage components and may vary due to the machine application, brand of parts, or OEM specifications available.
Description Rating Details  
track tensioners
shoe width 19 3/4" Click here to open photos and videos of this item.  
overall width of tracks (outside to outside of track shoes) 91"
grouser height 23% worn
pins and bushings rotated No
track link height 15% worn
pins & bushing wear (internal) Lubricated track, wear percentage not available.
pins & bushing wear (external) 20% worn
carrier rollers 24% worn Click here to open photos and videos of this item.  
track rollers 10% worn Click here to open photos and videos of this item.  
front idler height 24% worn Click here to open photos and videos of this item.  
sprockets Showing heavy wear. Click here to open photos and videos of this item.  
(5)


Specialty Equipment
Description Rating Details  
bucket condition 95" wide Click here to open photos and videos of this item.  
cutting edge, shanks, & teeth The reversible edge segments have not been turned. Click here to open photos and videos of this item.  
ripper condition Click here to open photos and videos of this item.  
(3)


Additional Photos
(24)
 

Oil Sample Analysis
  engine transmission
date of analysis Mar 07, 2003 Mar 07, 2003
analysis by Spectro Spectro
Tin 1 PPM 2 PPM
Chromium 1.3 PPM 0.1 PPM
Copper 3 PPM 5 PPM
Nickel 2.7 PPM 0.1 PPM
Lead 1 PPM 1 PPM
Magnesium 298 PPM 305 PPM
Water 0 % 0 %
Silver 0 PPM 0 PPM
Iron 26 PPM 15 PPM
Silicon 4 PPM 18 PPM
Sodium 1 PPM 1 PPM
Aluminum 5 PPM 0 PPM
Glycol N N
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.