Home Page / 2003 Caterpillar 988G Wheel Loader
 
Sold on
7/31/14
Winning Bid
US $76,000
# of Bids
SOLD!
ITEM DETAILS
36,067 Hours
Enclosed Cab, A/C, Heater, Joystick Steering, Autoshift, Ride Control, Cat Engine, Auto-Lube System, 35/65R33 Tires, 150" Wide General Purpose Bucket w/Teeth. *** See link below for Seller Supplied Maintenance Records ***

Inspected by IronPlanet.

Your purchase is protected by our IronClad Assurance.

IronPlanet Inspection Report



Please Note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.


General Appearance
Description Rating Details  
Paint
  
Sheet Metal (Fiberglass) Condition
  
Steps/Ladders
  
Hand Rails
  
 (20)


Control Station
Description Rating Details  
Mirrors
  
Glass
  
Seats/Armrests
  
Seat Belts Operational
  
Horn Operational
Control Lock Lever
Hydraulic Controls
  
Steering Control
  
Drivetrain Controls
  
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
  
Exterior Lights Yes
  
Warning Lights Operational
  
Travel Alarm Inoperable
Gauges Some gauges could not be properly checked during a short operating period.
  
Hour Meter/Odometer 36,067 Hours; Operational - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
  
Air Conditioner Operational
  
Heater Operational
  
Limited Function Check The main components operated except as noted.; Some components could not be operationally checked.
 (27)


Engine
Description Rating Details  
Fuel Type Diesel
Emission Certification Label None found
Blow by @ idle (subjective observation) Visible
  
Starter Operational
  
Turbo or Blower
  
Fuel System Operational
  
Exhaust System
  
Radiator
  
Oil Leaks
  
Fuel Leaks
  
Cooling System Leaks
  
Limited Function Check (Engine) The engine started and ran.
 (15)


Drivetrain
Description Rating Details  
Transmission Operational
  
Front Drive Axle
  
Rear Drive Axle Dripping Leak; Pivot bushing damage rear differential
  
Final Drives
  
Limited Function Check Some components could not be operationally checked.
 (18)


Hydraulics
See photos for condition
Description Rating Details  
Pumps (Hydraulics)
  
Valves
  
Hydraulic Tank
  
Hoses (Hydraulics)
  
Loader Lift Cylinders
  
Bucket Tilt Cylinders
  
Steering Cylinders
  
Limited Function Check The hydraulic system was operational.
 (16)


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
Articulating Center Pins Movement
  
Master Cylinder
Brake Lines/Hoses
Park Brake Stopped from a slow roll
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
  
Tire Brands Bridgestone
  
Tire Condition Radial
  
Wheel Condition
  
Wheel Studs, Nuts, Lugs
  
Lift Arm Condition
  
Chassis to Arm Pins
  
Tilt Linkage
  
Tilt Linkage Pins and Bushings
  
Bucket to Arm Pins Heavy wear
  
Limited Function Check The main components were operational except as noted.; Front and is extremely loose
 (45)


Specialty
Description Rating Details  
Loader Bucket Condition
  
Loader Bucket Cutting Edge/Shanks/Teeth
  
 (14)
 

Oil Sample Analysis
  engine hydraulic
date of analysis Jul 16, 2014 Jul 16, 2014
Lead 0 PPM 0 PPM
Chromium 0 PPM 0 PPM
Copper 1.5 PPM 5.7 PPM
Silver 0 PPM 0 PPM
Nickel 0.07 PPM 0 PPM
Tin 0.61 PPM 0 PPM
Aluminum 1.48 PPM 2.16 PPM
Silicon 9.79 PPM 12.84 PPM
Iron 10.92 PPM 9.91 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!