Home Page / 2006 Gradall/JLG 534D-9 Telehandler

2006 Gradall/JLG 534D-9 Telehandler (#463807)

Search for other Telehandlers items

Winning Bid: US $23,500  
# of Bids: 19   View Bid History
Sold on: 8/22/13
Auction Type: Featured Event
Features: 9,000 lb. Max Weight Capacity, 45' Max Lift Height, 60" Forks, Frame Leveling, Swing Carriage, John Deere 4045T Engine, 4x4, Open Operator Station, 13.00-24 Tires
Meter Reading: 1,397 Hours
Serial Number:
Location: California, United States
Zip/Postal Code:92021
(San Diego area)
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Surface rust; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
Control Station
Glass See photos for condition
Seats/Armrests Burn hole
Seat Belts Operational
Horn Operational
Hydraulic Controls
Steering Control
Drivetrain Controls
Transmission Disconnect Control
Load Charts Posted on cab wall
Oil Pressure The gauge registers in the operating range; Warning light inoperable
Warning Lights Inoperable
Travel Alarm Inoperable
Gauges Operational
Hour Meter/Odometer 1,397 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System No visible damage
Oil Leaks Seepage: Side of engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Emission Control Label
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational; Vibration from unknown source
Drive Motors
Front Drive Axle
Front Axle Oscillating Pin Wear Moderate movement
Rear Drive Axle
Final Drives
Limited Function Check The drivetrain was operational; Vibration from unknown source
Drivetrain #1
Pumps (Hydraulics) Seepage
Valves Seepage
Hydraulic Tank
Hoses (Hydraulics)
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Telescopic Boom Cylinders Not visible
Mast Tilt Cylinders Minor to moderate pin and bushing movement
Frame Leveling Cylinders Minor to moderate pin and bushing movement
Steering Cylinders Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Chain / Tensioners Minor wear
Rollers and Guides Moderate wear
Boom Wear Guides
Steering Linkage Minor to moderate movement
Frame Condition
Limited Function Check The main chassis components functioned during a limited check.
Brake Control
Brake Lines/Hoses
Park Brake Stopped from a slow roll
Limited Function Check The brake system functioned, stopping and holding the machine.
Tire Brands Solideal
Tire Condition Cuts; Gouges; See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Load Back Rest
Forks 60" Forks
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Aug 15, 2013 Aug 15, 2013
Silicon 16.77 PPM 6.67 PPM
Lead 1.97 PPM 1.74 PPM
Tin 0 PPM 0 PPM
Copper 0.53 PPM 5.76 PPM
Aluminum 4.54 PPM 2.46 PPM
Silver 0.06 PPM 0.09 PPM
Nickel 0 PPM 0 PPM
Chromium 3.08 PPM 0.06 PPM
Iron 18.51 PPM 10.76 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.