Home Page / Caterpillar D10N Crawler Tractor
 

Caterpillar D10N Crawler Tractor (#463726)

Search for other Crawler Tractors items

Winning Bid: US $79,000  
# of Bids: 40
Sold on: 8/22/13
Auction Type: Featured Event
SOLD!
Features: 16' Wide Semi-U Blade w/Tilt, Winch, Enclosed Cab, Rear Screen, A/C, Heater, Lever Steering Controls, Caterpillar 3412 Engine, Powershift Transmission, 32" Track Shoes, Additional 16' U-Blade w/Push Arms.
Meter Reading: 79,330 Hours
Serial Number:
Location: Texas, United States
Zip/Postal Code:75650
(Longview-Marshall area)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Surface rust; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors
Glass
Seats/Armrests
Seat Belts Operational
Horn Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter/Odometer 79,331 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Cool but not cold; Compressor mounted under seat (cannot photo); Fan control knob loose
Heater Operational
Interior Floor mat, Head liner, Dash plastic: Worn.
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
 
Engine
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) No noticeable vapor or pressure
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System See photos for condition
Radiator
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks Coolant odor; No leak seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational; Pulls engine down in all forward gears
Travel Speeds 3
Steering Clutches
Steering Brakes
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track) The drivetrain was operational except as noted.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics) Blade cylinder hoses: Worn.
Blade Lift Cylinders Seepage on the left cylinder; Seepage on the right cylinder; Minor to moderate pin and bushing movement
Blade Tilt Cylinders Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Roller Frames Weld repairs; Plates added to top of adjuster barrels
Belly pans
Pivot Shafts Leakage; Seepage
Equalizer Bar Pivot Points Wear consistent with hours and age
Limited Function Check (Chassis) The main components were operational when checked without a load.
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions Heavy movement
Tilt Linkage Pins and Bushings Minor to moderate movement
Blade Trunnions/bushings Heavy movement; Right front pin missing retainer; Plates welded to hold pin in place.
Limited Function Check (dozer) The main components were operational with movement as indicated.
Chassis #1
 
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads
Track Tensioners Operational; Seepage
Grouser Height Left Side: 54 mm; Right Side: 55 mm
Track links
Pins and Bushings Turned? No
Pins and bushings
Track Rollers
Idlers
Sprockets Pointed
Pins and bushings
 
Specialty
Blade Condition Worn
Blade Cutting Edge Condition Reversible-not turned; End bits missing bolts
Winch Inoperable
Other Additional Blade w/push arms(No end caps); Worn; Holes L:19'5" W:17" H:7'5"
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Aug 15, 2013 Aug 15, 2013
Silicon 3.94 PPM 4.67 PPM
Lead 2.25 PPM 4.05 PPM
Tin 0 PPM 0 PPM
Copper 1.74 PPM 2.13 PPM
Aluminum 3.44 PPM 1.32 PPM
Silver 0.07 PPM 0.05 PPM
Nickel 0.27 PPM 0 PPM
Chromium 0.31 PPM 0.1 PPM
Iron 25.34 PPM 36.93 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.