Home Page / Caterpillar 140H Motor Grader
 

Caterpillar 140H Motor Grader (#463030)

Search for other Motor Graders items

Winning Bid: US $77,000  
# of Bids: 33   View Bid History
Sold on: 8/29/13
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, A/C, Heater, Caterpillar 3306 Engine, 14.00x24 Tires, Scarifier, 14' Blade
Meter Reading: See Report
Serial Number:
Location: Missouri, United States
Zip/Postal Code:63627
(Sainte Genevieve County)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Blemishes where decals have been removed; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Surface rust; Minor dents; See photos for condition
Steps/Ladders See photos for condition; Bent
Hand Rails No visible damage; See photos for condition
General Appearance #1
 
Control Station
Mirrors No visible damage
Glass No visible damage; See photos for condition
Seats/Armrests See photos for condition
Seat Belts Operational
Horn Operational
Control Lock Lever
Hydraulic Controls
Steering Control Minor to moderate steering wheel play
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Operational; Back up
Gauges Operational
Hour Meter/Odometer 770 Hours; Operational hour meter; There is an hour meter replacement/change label that has the following reading on it: 12,687 - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Cool but not cold
Heater Operational
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
 
Engine
Emission Control Label None found
Blow by @ idle (subjective observation) Visible
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System No visible damage; See photos for condition
Radiator Minor plugging of fins
Oil Leaks Fluid Accumulation: Side of engine; Fluid Accumulation: Oil Pan
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader) Powershift; 8 speeds
Transmission Operational; Seepage; Possible clunking sound
Rear Tandems (Chain Drives)
Final Drives Seepage
Limited Function Check The drivetrain was operational. Unable to determine where the clunking sound coming from. It is either the scarifier or the transmission.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Seepage
Hydraulic Tank
Hoses (Hydraulics) going to both valves; Hoses in mid section of machine: Braid exposure. Hoses in mid section of machine: Seepage.
Hydraulic Motors
Steering Cylinders Minor to moderate pin and bushing movement
Articulation Cylinders Minor to moderate pin and bushing movement; moderate
Wheel Lean Cylinders Minor to moderate pin and bushing movement; moderate
Blade Lift Cylinders Minor to moderate pin and bushing movement; moderate-shims left
Blade Angle Cylinders Minor to moderate pin and bushing movement; moderate
Blade Side Shift Cylinders Minor to moderate pin and bushing movement; moderate-shims left
Saddle Positioning Cylinder Minor to moderate pin and bushing movement; Moderate
Saddle Lock Pin Operational
Limited Function Check The hydraulic system was operational.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle)
Y-frame
Y-frame Pivot Trunnion Minor to moderate movement; Shims remaining
Circle Frame and Brackets
Circle Wear Strips Wear consistent with hours and age
Circle Support Brackets
Circle Gear Box Some slack
Circle Gear Visible slack
Mold Board Slide Wear Strips Wear consistent with hours and age
Articulating Center Pins Wear Minor to moderate movement; moderate
Front Axle Oscillating Pin Wear Minor to moderate movement
Steering Linkage Minor to moderate movement
Wheel Tilt Linkage
Belly pans
Limited Function Check (grader) The main chassis components were operational in a limited check.
Brake Type (Motorgrader) Air over hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Stopped the machine while rolling
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition Surface Rust
Tire Brands Firestone
Tire Condition See photos; Minor cuts and gouges; Bias ply
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
 
Specialty
Blade Condition
Blade Cutting Edge Condition (MG) Worn; has teeth
Scarifier Missing teeth; Possible clunking sound
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Aug 19, 2013 Aug 19, 2013
Silicon 1.64 PPM 2.99 PPM
Lead 2.3 PPM 4.76 PPM
Tin 0.96 PPM 0 PPM
Copper 0.31 PPM 120.93 PPM
Aluminum 0.43 PPM 13.6 PPM
Silver 0.06 PPM 0.07 PPM
Nickel 0 PPM 0 PPM
Chromium 0.4 PPM 0.2 PPM
Iron 7.72 PPM 13.46 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.