Home Page / Caterpillar D8N Crawler Tractor

Caterpillar D8N Crawler Tractor (#462706)

Search for other Crawler Tractors items

Winning Bid: US $61,000  
# of Bids: 17   View Bid History
Sold on: 8/29/13
Auction Type: Featured Event
Features: 3 Position Ripper, 1 Shank Included, 14' Wide U-Blade w/Tilt, Enclosed Cab, Heater, Caterpillar 3406 Engine, Powershift Transmission, 22" Track Shoes. *** See link below for Seller Supplied Service Records ***
Meter Reading: 9,863 Hours
Serial Number:
Location: Alaska, United States
Zip/Postal Code:99645
(Matanuska Susitna County)
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; Blemishes where decals have been removed; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Bent panels; Missing panels; Cracks; Holes; Surface rust; Metal corrosion; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
Control Station
Glass Damaged weather stripping
Seats/Armrests Torn cover
Seat Belts Operational
Horn Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational; Warning light stays on
Travel Alarm Operational
Gauges Some gauges could not be properly checked during a short operating period.
Hour Meter/Odometer 9,863 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Inoperable; Controls inoperable
Interior Head liner, Dash plastic: Worn. Floor mat: Damaged.
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational; Fluid accumulation
Exhaust System See photos for condition
Oil Leaks None seen
Fuel Leaks Fluid Accumulation: Injection pump.
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran. The precleaner screen is loose.
Blow by @ idle (subjective observation)
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Travel Speeds 3
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track) The drivetrain was operational without a load.
Drivetrain #1
See photos for condition
Pumps (Hydraulics) Not visually inspected
Valves Not visually inspected
Hydraulic Tank
Hoses (Hydraulics)
Blade Lift Cylinders Moderate pin and bushing movement
Blade Tilt Cylinders Moderate pin and bushing movement
Ripper Cylinders Moderate pin and bushing movement; Fluid accumulation on the cylinders
Limited Function Check The hydraulic system was operational.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Roller Frames Plate welded to roller left roller frame
Belly pans Missing bolts
Pivot Shafts No visible leaks
Equalizer Bar Pivot Points Wear consistent with hours and age
Limited Function Check (Chassis) The main components were operational when checked without a load.
Push Arm/C-Frame Condition Bent; Right side push arm is slightly bent.
Push Arm Pivot/C-FrameTrunnions Moderate movement
Tilt Linkage Pins and Bushings Moderate movement
Blade Trunnions/bushings Moderate movement
Limited Function Check (dozer) The main components were operational with movement as indicated.
Chassis #1
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads
Track Tensioners Operational; Plate welded to roller left roller frame
Grouser Height Left Side: 37 mm; Right Side: 36 mm
Track links
Pins and Bushings Turned? No
Pins and bushings Worn
Track Rollers
Pins and bushings
Blade Condition Worn; Weld repairs; Re-plated; Bent/damaged guard
Blade Cutting Edge Condition Reversible-turned
Ripper Condition Pivot pin wear; Missing tooth
Specialty #1
Oil Sample Analysis Engine Hydraulic Transmission
date of analysis Aug 14, 2013 Aug 14, 2013 Aug 14, 2013
Silicon 4.03 PPM 8.48 PPM 10.81 PPM
Lead 1.62 PPM 1.74 PPM 0.34 PPM
Tin 0 PPM 0 PPM 0 PPM
Copper 89.01 PPM 8.54 PPM 5.54 PPM
Aluminum 3.44 PPM 2.82 PPM 2.2 PPM
Silver 0.04 PPM 0.09 PPM 0.12 PPM
Nickel 0.37 PPM 0 PPM 0 PPM
Chromium 0.47 PPM 3.38 PPM 0.22 PPM
Iron 26.29 PPM 10.72 PPM 25.85 PPM
Glycol NEG N/A N/A
Water NEG N/A N/A
Fuel <5% N/A N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.