Home Page / Fiat Allis M-65B Motor Grader
 

Fiat Allis M-65B Motor Grader (#456241)

Search for other Motor Graders items

Winning Bid: US $17,750  
# of Bids: 65   View Bid History
Sold on: 7/11/13
Auction Type: Featured Event
SOLD!
Features: Open Operator Station, Fiat Engine, 15-19.5 Tires, 10' Blade
Meter Reading: 8,536 Hours
Serial Number:
Location: Kentucky, United States
Zip/Postal Code:40361
(Lexington area)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Not original paint; Blemishes where decals have been removed; Scratches; Chips; Recently painted
Sheet Metal (Fiberglass) Condition See photos for condition
Steps/Ladders No visible damage
Hand Rails No visible damage
General Appearance #1
 
Control Station
Seats/Armrests
Seat Belts Operational
Horn Operational
Hydraulic Controls Worn
Steering Control Minor to moderate steering wheel play
Drivetrain Controls
Oil Pressure The gauge registers in the operating range. 45 PSI
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Operational
Gauges Difficult to read; Some gauges inoperable; Inoperable gauge(s): Transmission Temp, Water Temp
Hour Meter/Odometer 8,536 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The main components are in place and operational.
Hour Meter/Odometer
 
Engine
Emission Control Label None found
Blow by @ idle (subjective observation) Visible
Starter Operational
Fuel System Leak
Exhaust System No visible damage
Radiator
Oil Leaks Seepage: Valve cover. Seepage: Side of engine. Fluid Accumulation: Rear of engine. Fluid Accumulation: Front of engine. Seepage: Oil Pan.
Fuel Leaks Seepage: Injection pump.
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader) Powershift; 3 speeds
Transmission Fluid accumulation
Rear Drive Axle Fluid Accumulation
Rear Tandems (Chain Drives)
Final Drives Fluid Accumulation; Dripping Leak
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Seepage
Hydraulic Tank Seepage
Hoses (Hydraulics) Hoses in mid section of machine, Hoses at rear of machine: Braid exposure. Hoses at front of machine, Hoses in mid section of machine, Hoses at rear of machine: Worn.
Hydraulic Motors
Steering Cylinders Fluid accumulation on the left cylinder; Minor to moderate pin and bushing movement
Wheel Lean Cylinders Fluid accumulation on the left cylinder; Fluid accumulation on the right cylinder
Blade Lift Cylinders Fluid accumulation on the left cylinder; Heavy pin and bushing movement
Blade Side Shift Cylinders Minor to moderate pin and bushing movement
Saddle Positioning Cylinder
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle)
Y-frame
Y-frame Pivot Trunnion Heavy movement
Circle Frame and Brackets
Circle Wear Strips Heavy wear
Circle Support Brackets
Circle Gear Box
Circle Gear Visible slack
Mold Board Slide Wear Strips Wear consistent with hours and age
Front Axle Oscillating Pin Wear Minor to moderate movement
Steering Linkage Minor to moderate movement
Wheel Tilt Linkage Visible wear
Belly pans
Limited Function Check (grader) The main chassis components were operational in a limited check.
Brake Type (Motorgrader) Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Inoperable
Limited Function Check The service brakes performed. The park brake would not hold the machine.
Frame Condition
Tire Brands Left Front: Titan; Right Front: Titan; Right Middle: Titan; Right Rear: Titan; Left Rear: Titan; Left Middle: Titan
Tire Condition See photos; Minor cuts and gouges
Wheel Condition
Chassis #1
 
Specialty
Blade Condition
Blade Cutting Edge Condition (MG) Worn
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Jun 25, 2013 Jun 25, 2013
Silicon 9.29 PPM 13.48 PPM
Lead 4.41 PPM 9.94 PPM
Tin 0 PPM 0 PPM
Copper 7.5 PPM 34.21 PPM
Aluminum 6.8 PPM 1.6 PPM
Silver 0 PPM 0.39 PPM
Nickel 0.31 PPM 0.08 PPM
Chromium 3.38 PPM 0 PPM
Iron 28.07 PPM 9.67 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.