Home Page / Caterpillar 416C IT 4x4 Backhoe Loader

Caterpillar 416C IT 4x4 Backhoe Loader (#455215)

Search for other Backhoe Loaders items

Winning Bid: US $19,500  
# of Bids: 25   View Bid History
Sold on: 6/26/13
Auction Type: Featured Event
Features: Open Operator Station, Caterpillar 3054 Engine, 4x4, Front Auxiliary Hydraulics, Front Quick Coupler, Forks, 89" Wide General Purpose Loader Bucket, 24" Rear Bucket.
Meter Reading: 425 Hours
Serial Number:
Location: South Carolina, United States
Zip/Postal Code:29172
(Columbia area)
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; Peeling; See photos for condition
Sheet Metal (Fiberglass) Condition See photos for condition; Surface rust; Bent panels; Dents; Grille has damage; Top of canopy at lights has melted areas/damage; Minor dents
Steps/Ladders See photos for condition
Hand Rails No visible damage
General Appearance #1
Control Station
Mirrors Missing
Seat Belts Operational
Horn Operational
Drivetrain Controls
Steering Control Minor to moderate steering wheel play
Transmission Disconnect Control
Hydraulic Controls
Backhoe Control Configuration Left stick (Boom and Swing) Right stick (Stick and Bucket)
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter 425 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The main components operated except as noted.
Hour Meter
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Visible
Starter Operational
Fuel System Operational
Exhaust System No visible damage
Oil Leaks Seepage: Side of engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational; Seepage
Front Drive Axle
Front Axle Oscillating Pin Wear Minor to moderate movement
Rear Drive Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
See photos for condition
Pumps (Hydraulics)
Hydraulic Tank
Hoses (Hydraulic)
Auxiliary Hydraulic Plumbing Not operationally checked; Front
Loader Lift Cylinders Minor to moderate pin and bushing movement
Bucket Tilt Cylinders Minor to moderate pin and bushing movement
Outrigger Cylinders Minor to moderate pin and bushing movement
Boom Swing Cylinders Dripping leak on the left cylinder; Dripping leak on the right cylinder; Minor to moderate pin and bushing movement
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Stick Cylinder Seepage; Minor to moderate pin and bushing movement
Bucket Cylinder Seepage; Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational except as noted.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minor to moderate movement; Heavy movement
Brake Type Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake Stopped from a slow roll
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size 12.5/80-118 Front tires; 19.55L-24 Rear tires; Front: Left: BKT; Front: Right: BKT; Rear: Right: Denman; Rear: Left: Denman
Tire Condition See photos; Minor cuts and gouges; Bias ply
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Tilt Linkage
Chassis to Arm Pins Minor to moderate movement
Tilt Linkage Pins and Bushings Minor to moderate movement
Quick Coupler to Arms Pins Heavy movement
Limited Function Check The main components were operational except as noted.
Boom Condition
Stick Condition
Boom Lock (Backhoe) Inoperable
Swing Tower Pivot Heavy movement
Boom Base Pin and Bushings Heavy movement
Pin and Bushings Boom to Stick Minor to moderate movement
Pin and Bushings Stick to Bucket Minor to moderate movement
Outriggers Reversible
Limited Function Check The main components were operational with movement as indicated.
Chassis #1
Loader Bucket Condition Material residue
Loader Bucket Edge Reversible-not turned
Front Quick Coupler Hydraulic coupler operational
Backhoe / Excavator Bucket Condition
Backhoe / Excavator Bucket Shanks and Teeth Worn
Forks 52" Forks
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Jun 17, 2013 Jun 17, 2013
Silicon 22.97 PPM 8.07 PPM
Lead 0 PPM 7.13 PPM
Tin 0.86 PPM 0 PPM
Copper 0.96 PPM 50.59 PPM
Aluminum 8.55 PPM 4.07 PPM
Silver 0.01 PPM 0 PPM
Nickel 0.21 PPM 0.26 PPM
Chromium 0.86 PPM 0.56 PPM
Iron 190.63 PPM 46.1 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.