Home Page / 2000 Caterpillar D5C Series III Crawler Tractor
 

2000 Caterpillar D5C Series III Crawler Tractor (#455210)

Search for other Crawler Tractors items

Winning Bid: US $20,500  
# of Bids: 11   View Bid History
Sold on: 6/27/13
Auction Type: Featured Event
SOLD!
Features: 8' 10" Wide, 6 Way Straight Blade, Open Operator Station, Caterpillar 3046 Engine, Hydrostatic Drive, 20" Track Shoes
Meter Reading: See Report
Serial Number:
Location: New York, United States
Zip/Postal Code:13029
(Syracuse area)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) Yes
Paint Not original paint; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Scrapes; Surface rust; See photos for condition
Hand Rails No visible damage
General Appearance #1
 
Control Station
Mirrors Significant rust
Seats/Armrests Damaged frame; Damaged armrest; Loose seat & armrest; Torn cover
Seat Belts Operational
Horn Inoperable; Missing button
Control Lock Lever Inoperable
Hydraulic Controls Loose
Steering Controls Loose; Damaged handle & boot
Drivetrain Controls Drivetrain control must be manually held in-place and will not lock in forward or reverse.
Oil Pressure The gauge registers in the operating range.
Exterior Lights Operational Yes
Warning Lights Inoperable
Travel Alarm Operational
Gauges Operational
Hour Meter/Odometer 1,725 Hours; Operational hour meter; There is a label by the hour meter that reads: Next service 15693 - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
 
Engine
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) No noticeable vapor or pressure
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System Dents; Bent tip
Radiator Minor fin damage
Oil Leaks Fluid Accumulation: Oil Pan
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Hydrostatic
Travel Speeds Variable single
Service Brakes Low pedal
Drive Motors Pulled unevenly; Fluid Accumulation
Final Drives Fluid Accumulation
Limited Function Check (Drivetrain-Track) The drivetrain was operational except as noted during a limited check.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Fluid accumulation
Valves Worn; Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics) Worn
Blade Lift Cylinders Heavy pin and bushing movement
Blade Angle Cylinders Seepage on the right cylinder; Damaged bushing; Heavy pin and bushing movement
Blade Tilt Cylinders Damaged; Heavy pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition Rusty
Roller Frames Caked with mud
Belly pans Minor dents; Oily
Equalizer Bar Pivot Points Loose
Limited Function Check (Chassis) The components that were checked were operational except as noted.
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions Heavy movement
Tilt Linkage Pins and Bushings Heavy movement
Angle Linkage Pins and Bushings Heavy movement
Blade Trunnions/bushings Heavy movement; Excessive wear/damage
Limited Function Check (dozer) The main components were operational with damage as noted.
Chassis #1
 
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads Bent pads; See photos for condition
Track Tensioners See photos for condition
Grouser Height 22 mm
Track links See photos for condition
Pins and Bushings Turned? Yes
Pins and bushings Heavy wear; See photos for condition
Carrier Rollers See photos for condition
Track Rollers See photos for condition
Idlers See photos for condition
Sprockets See photos for condition
Pins and bushings
 
Specialty
Blade Condition
Blade Cutting Edge Condition Worn; Reversible-not turned
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Jun 17, 2013 Jun 17, 2013
Silicon 11.76 PPM 2.31 PPM
Lead 2.38 PPM 4.42 PPM
Tin 0 PPM 0.23 PPM
Copper 0.69 PPM 21.55 PPM
Aluminum 1.23 PPM 1.64 PPM
Silver 0 PPM 0.45 PPM
Nickel 0.12 PPM 0 PPM
Chromium 0.5 PPM 0.37 PPM
Iron 4.18 PPM 4.62 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.