Home Page / Caterpillar D8N Crawler Tractor

Caterpillar D8N Crawler Tractor (#453624)

Search for other Crawler Tractors items

Winning Bid: US $49,000  
# of Bids: 35
Sold on: 6/27/13
Auction Type: Featured Event
Features: 12' 10" Wide Semi-U Blade w/ Tilt, Enclosed Cab, A/C, Heater, Differential Steering, Ripper Control, Caterpillar 3406 Engine, Powershift Transmission, 24" Track Shoes
Meter Reading: 20,310 Hours
Serial Number:
Location: New York, United States
Zip/Postal Code:10924
(Orange County)
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
General Appearance
CE Mark (on or near data plate) No
Paint Not original paint; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Surface rust; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
Control Station
Seat Belts Operational
Horn Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter/Odometer 20,310 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Operational; Cool but not cold; Vents damaged
Heater Operational
Interior Age appropriate wear
Limited Function Check The main components are in place and operational.
Hour Meter/Odometer
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Minimal
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System No visible damage
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Travel Speeds 3
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track) The drivetrain was operational without a load.
Drivetrain #1
See photos for condition
Pumps (Hydraulics) Not visually inspected
Hydraulic Tank
Hoses (Hydraulics) Blade cylinder hoses: Seepage; Age appropriate wear
Auxiliary Hydraulic Plumbing Capped off; Not operationally checked; Rear
Blade Lift Cylinders Fluid accumulation on the right cylinder; Minor to moderate pin and bushing movement
Blade Tilt Cylinders Fluid accumulation on the right cylinder; Minor to moderate pin and bushing movement; Pitting on chrome
Limited Function Check The hydraulic system was operational without a load. There is oil residue from unknown source around side panel.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Roller Frames
Belly pans
Pivot Shafts
Equalizer Bar Pivot Points
Limited Function Check (Chassis) The main components were operational when checked without a load. The radiator support group has moderate pin and bushing movement (see photos).
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions Minor to moderate movement
Tilt Linkage Pins and Bushings Minor to moderate movement; Shims remaining
Blade Trunnions/bushings Minor to moderate movement
Limited Function Check (dozer) The main components were operational in a limited check.
Chassis #1
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads See photos for condition
Track Tensioners See photos for condition
Grouser Height Left Side: 50 mm; Right Side: 50 mm
Track links See photos for condition
Pins and Bushings Turned? No
Pins and bushings See photos for condition
Track Rollers See photos for condition
Idlers See photos for condition; Seepage on right front
Sprockets See photos for condition
Pins and bushings
Blade Condition Weld repair; Scrapes; Built up spill guard; Age appropriate wear
Blade Cutting Edge Condition
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Jun 11, 2013 Jun 11, 2013
Silicon 6.4 PPM 16.38 PPM
Lead 0.31 PPM 0 PPM
Tin 0 PPM 0 PPM
Copper 2.46 PPM 1.62 PPM
Aluminum 0.94 PPM 2 PPM
Silver 0 PPM 0.04 PPM
Nickel 0.24 PPM 0.13 PPM
Chromium 0.12 PPM 0.18 PPM
Iron 12.63 PPM 82.67 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.