Home Page / Caterpillar 12G Motor Grader
 

Caterpillar 12G Motor Grader (#453593)

Search for other Motor Graders items

Winning Bid: US $48,500  
# of Bids: 107   View Bid History
Sold on: 6/27/13
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, Heater, Caterpillar 3306 Engine, 14.00-28 Tires, Scarifier, Ripper, 14' Blade.
Meter Reading: See Report
Serial Number:
Location: New York, United States
Zip/Postal Code:12586
(Orange County)
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Missing panels; Surface rust; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors
Glass
Seats/Armrests Damaged armrest
Seat Belts Not equipped
Control Lock Lever
Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises; The gauge registers in the operating range.
Exterior Lights Operational Some inoperable
Warning Lights Operational
Travel Alarm Inoperable
Gauges Operational
Hour Meter/Odometer 1,109 Hours; Operational hour meter; There is a hour meter replacement/change out label that reads: 1764 - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
 
Engine
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Fuel System Operational
Exhaust System See photos for condition
Radiator
Oil Leaks Fluid Accumulation: Valve cover. Fluid Accumulation: Oil Pan.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader) Powershift
Transmission Operational
Rear Drive Axle Fluid Accumulation
Rear Tandems (Chain Drives) Fluid Accumulation
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
See photos for condition
Pumps (Hydraulics) Noisy
Valves Seepage; Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics)
Hydraulic Motors
Steering Cylinders Fluid accumulation on the cylinders; Minor to moderate pin and bushing movement
Articulation Cylinders Fluid accumulation on the cylinders; Minor to moderate pin and bushing movement
Wheel Lean Cylinders Minor to moderate pin and bushing movement
Blade Lift Cylinders Minor to moderate pin and bushing movement
Blade Angle Cylinders Minor to moderate pin and bushing movement
Blade Side Shift Cylinders Seepage; Minor to moderate pin and bushing movement
Saddle Positioning Cylinder Minor to moderate pin and bushing movement
Saddle Lock Pin
Limited Function Check The hydraulic system was operational without a load. Dripping leak from ripper cylinder.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle)
Y-frame
Y-frame Pivot Trunnion
Circle Frame and Brackets Weld repairs; Repair plating
Circle Wear Strips Wear consistent with hours and age
Circle Support Brackets
Circle Gear Box Minor wear
Circle Gear Minor wear
Mold Board Slide Wear Strips Wear consistent with hours and age
Articulating Center Pins Wear
Front Axle Oscillating Pin Wear
Steering Linkage Minor to moderate movement
Wheel Tilt Linkage
Belly pans
Limited Function Check (grader) The main chassis components were operational in a limited check.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands Goodyear & Solideal
Tire Condition See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
 
Specialty
Blade Condition
Blade Cutting Edge Condition
Ripper Condition Angle cylinder leaks
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Jun 13, 2013 Jun 13, 2013
Silicon 2.27 PPM 10.96 PPM
Lead 0.9 PPM 39.28 PPM
Tin 0 PPM 0 PPM
Copper 0.72 PPM 84.53 PPM
Aluminum 2.14 PPM 6.08 PPM
Silver 0 PPM 0.06 PPM
Nickel 0.2 PPM 0.59 PPM
Chromium 1.3 PPM 0.25 PPM
Iron 13.64 PPM 82.36 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.