Home Page / 1999 Genie S-65 Telescopic Boom Lift
 

1999 Genie S-65 Telescopic Boom Lift (#452808)

Search for other Telescopic Boom Lifts items   View all Sunbelt Rentals items

Winning Bid: US $11,000
Won using: Win It Now
 
# of Bids: 1   View Bid History
Sold on: 5/29/13
Auction Type: Daily Marketplace
SOLD!
Features: 65' Max Lift Height, 500 lb. Rated Work Load, 96" Long x 36" Wide Basket, Swivel Basket, Jib, 15-19.5 Tires, Ford LRG-425 EFI Engine, Dual Fuel, 4x4
Meter Reading: 2,339 Hours
Serial Number:
Location: Florida, United States
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition Scrapes; Surface rust in areas; Sheet metal erosion in areas; See photos for condition; Cracks
Hand Rails Bent; See photos for condition
Operators Manual Yes
ANSI Guidelines No
General Appearance #1
 
Control Station Ground
Hour Meter 2,339 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Gauges Operational
Function Controls
Oil Pressure The gauge registers in the operating range.
Warning Lights Operational
Safety Alarm Operational
Limited Function Check The main components are in place and operational.
Hour Meter
 
Control Station Upper
Control Console Overspray; Labels missing or hard to read
Horn Operational
Emergency Shut Off Switch Functional
Safety Control Foot Switch Operational
Function Controls
Limited Function Check The main components are in place and operational.
Control Station Upper #1
 
Engine
A propane fuel tank will not be included with this unit at the time of sale. HAZMAT Certificates may be required for transport. IronPlanet is not responsible for the disposal of any remaining product or residue.
LP Tank No LP Tank
Emission Control Label None found
Starter Operational
Fuel System Operational
Exhaust System Manifold leaks
Radiator/Oil Cooler
Oil Leaks Seepage: Side of engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Engine #1
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check The drivetrain functioned without a load.
Drivetrain #1
 
Hydraulics
See photos for condition
Pumps (Hydraulics) The hydraulic system is weak and slower than normal
Valves Fluid accumulation
Hydraulic Tank Minor Leak at return filter
Hoses (Hydraulic)
Steering Cylinders
Boom Lift Cylinder Fluid accumulation
Secondary Boom Cylinder
Basket Tilt Cylinder
Basket Rotator Motor Fluid accumulation
Frame Leveling Cylinders
Limited Function Check The hydraulic system is weak and slower than normal.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Frame Condition
Brake System The brake system functioned, stopping and holding the machine.
Tire Condition See photos; Cuts; Gouges; Bias ply
Wheel Condition
Wheel Studs, Nuts, Lugs
Turn-Table Bearing Performs within tolerance expected for age and hours
Bottom Covers
Swing Motor Gear Wear
Hydraulic Center Swivel
Boom Condition
Boom Wear Guides
Jib Condition
Cable Tray Ladder
Work Basket Railing bent; Concrete Residue
Chassis #1
Oil Sample Analysis
Oil sample analysis not available.

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.