Home Page / 1999 Caterpillar IT62G Integrated Tool Carrier
 

1999 Caterpillar IT62G Integrated Tool Carrier (#451859)

Search for other Wheel Loaders items

Winning Bid: US $35,000  
# of Bids: 10   View Bid History
Sold on: 5/30/13
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, Heater, 3rd Valve, Autoshift, Caterpillar 3126 Engine, 23.5R25 Tires, Hydraulic Coupler, 9'6" Wide General Purpose Bucket, Forks
Meter Reading: 14,655 Hours
Serial Number:
Location: Michigan, United States
Zip/Postal Code:48091
(Macomb County)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; Concrete residue; See photos for condition
Sheet Metal (Fiberglass) Condition See photos for condition; Surface rust; Metal corrosion; Metal erosion; Dents
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors No visible damage
Glass Left: Damaged weather stripping.
Seats/Armrests Burn holes
Seat Belts Operational
Horn Operational
Control Lock Lever
Hydraulic Controls
3rd Valve Equipped with a 3rd valve and plumbing for an auxiliary attachment.
Steering Control Heavy steering wheel play
Drivetrain Controls
Transmission Disconnect Operational
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Some inoperable; Some damaged
Warning Lights Operational
Travel Alarm Operational
Gauges Some gauges could not be properly checked during a short operating period.
Hour Meter/Odometer 14,655 Hours; 33,246 Miles; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
Interior Floor mat, Head liner, Dash plastic: Worn.
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
 
Engine
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Visible
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System Rust penetration
Radiator Significant plugging of fins
Oil Leaks Fluid Accumulation: Rear of engine. Fluid Accumulation: Front of engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Transmission Operational; Fluid accumulation
Front Drive Axle
Rear Drive Axle
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Not visually inspected
Valves Not visually inspected
Hydraulic Tank
Hoses (Hydraulics) Front Loader: Braid Exposure.
Loader Lift Cylinders Fluid accumulation on the left cylinder; Fluid accumulation on the right cylinder; Minor to moderate pin and bushing movement
Bucket Tilt Cylinders Minor to moderate pin and bushing movement
Steering Cylinders Heavy pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Articulating Center Pins Minor to visible movement
Brake Type Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake Stopped from a slow roll
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition Surface Rust
Tire Brands Left Front: Michelin; Right Front: Michelin; Right Rear: Continental; Left Rear: Uniroyal
Tire Condition Cuts; Gouges
Wheel Condition Bent
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Tilt Linkage
Chassis to Arm Pins Minor to moderate movement
Tilt Linkage Pins and Bushings Heavy movement
Quick Coupler to Arms Pins Heavy movement
Limited Function Check The main chassis components were operational in a limited check.
Chassis #1
 
Specialty
Loader Bucket Condition Worn; Holes; Material residue; Dented
Loader Bucket Cutting Edge/Shanks/Teeth Reversible-turned
Loader Quick Coupler Hydraulic coupler operational; Hydraulic coupler not operational; Wear at pin connections
Forks 57" forks; Bowed
Specialty #1
Oil Sample Analysis Engine
date of analysis May 21, 2013
Silicon 1.13 PPM
Lead 15.39 PPM
Tin 0 PPM
Copper 0 PPM
Aluminum 0 PPM
Silver 0 PPM
Nickel 0 PPM
Chromium 0 PPM
Iron 5.53 PPM
Glycol NEG
Water NEG
Fuel <5%
Oil Sample Analysis
Oil sample analysis not available.

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.