Home Page / 2007 Caterpillar 420E 4x4 Backhoe Loader
 

2007 Caterpillar 420E 4x4 Backhoe Loader (#451507)

Search for other Backhoe Loaders items

Winning Bid: US $38,000  
# of Bids: 25   View Bid History
Sold on: 5/23/13
Auction Type: Featured Event
SOLD!
Features: Open Operator Station, Control Pattern Changer, Caterpillar 3054C Engine, 4x4, Extendable Stick, Rear Auxiliary Hydraulics, Rear Quick Coupler, 89" Wide Multi-Purpose Loader Bucket, 24" Rear Bucket.
Meter Reading: 4,344 Hours
Serial Number:
Location: California, United States
Zip/Postal Code:92562
(Riverside County)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Grille has damage; See photos for condition
Steps/Ladders See photos for condition
Hand Rails No visible damage
General Appearance #1
 
Control Station
Mirrors
Seats/Armrests
Seat Belts Operational
Horn Inoperable
Drivetrain Controls
Steering Control
Transmission Disconnect Control
Hydraulic Controls Damaged boots
Backhoe Control Configuration Equipped with a control pattern changer
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes; Some inoperable; Two lights are not functional.
Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter 4,344 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Interior
Limited Function Check The main components operated except as noted.
Hour Meter
 
Engine
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minimal
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System No visible damage
Radiator
Oil Leaks Fluid Accumulation: Side of engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Front Drive Axle
Front Axle Oscillating Pin Wear Minor to moderate movement
Rear Drive Axle Hose has seepage.
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulic) Backhoe assembly: Fluid accumulation; Fluid accumulation around auxiliary valve.
Auxiliary Hydraulic Plumbing Not operationally checked; Rear
Loader Lift Cylinders Minor to moderate pin and bushing movement
Bucket Tilt Cylinders Minor to moderate pin and bushing movement
Multi Purpose Bucket Cylinders Minor to moderate pin and bushing movement
Outrigger Cylinders Minor to moderate pin and bushing movement; Has minor scratches on rams.
Boom Swing Cylinders Minor to moderate pin and bushing movement
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Stick Cylinder Minor to moderate pin and bushing movement
Bucket Cylinder Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minor to moderate movement
Brake Type Hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake Stopped from a slow roll
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size 12.5/80-18 Front tires; 19.5L-24 Rear tires; Front: Left: Solideal; Front: Right: Solideal; Rear: Right: Razor Back; Rear: Left: Goodyear
Tire Condition See photos; Plugs
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Tilt Linkage
Chassis to Arm Pins Minor to moderate movement
Tilt Linkage Pins and Bushings Minor to moderate movement
Bucket to Arm Pins
Limited Function Check The main chassis components were operational in a limited check.
Boom Condition Dented
Stick Condition
Stick Extension Wear Guides Minor to moderate movement
Boom Lock (Backhoe)
Swing Tower Pivot Minor to moderate movement
Boom Base Pin and Bushings Minor to moderate movement
Pin and Bushings Boom to Stick Minor to moderate movement
Pin and Bushings Stick to Coupler Minor to visible movement
Outriggers Reversible
Limited Function Check The main components were functional in a limited check.
Chassis #1
 
Specialty
Loader Bucket Condition Has holes in back of bucket.
Loader Bucket Edge Reversible-not turned
Backhoe / Excavator Bucket Condition
Backhoe / Excavator Bucket Shanks and Teeth Mismatched teeth; Worn
Rear Quick Coupler Manual rear coupler; Operational
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis May 14, 2013 May 14, 2013
Silicon 3 PPM 11 PPM
Lead 0 PPM 0 PPM
Tin 2 PPM 0 PPM
Copper 0 PPM 5 PPM
Aluminum 5 PPM 2 PPM
Silver 0 PPM 0 PPM
Nickel 1.6 PPM 0.9 PPM
Chromium 0 PPM 0.3 PPM
Iron 5 PPM 16 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.