Home Page / Komatsu PC250 LC-6LE Track Excavator

Komatsu PC250 LC-6LE Track Excavator (#451310)

Search for other Excavators items

Winning Bid: US $41,000  
# of Bids: 39   View Bid History
Sold on: 5/30/13
Auction Type: Featured Event
Features: Enclosed Cab, A/C, Heater, Komatsu SA6D102E-1 Engine, 11' 5 1/2" Stick, 31 1/2" Track Shoes, Auxiliary Hydraulic Plumbing, 41" Wide Tooth Bucket
Meter Reading: 9,767 Hours
Serial Number:
Location: Illinois, United States
Zip/Postal Code:62702
(Springfield area)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
General Appearance
CE Mark (on or near data plate) No
Paint Not original paint; Scratches; See photos for condition
Sheet Metal (Fiberglass) Condition Dents; Bent panels; See photos for condition
Steps/Ladders See photos for condition; Bent
Hand Rails See photos for condition; Bent
General Appearance #1
Control Station
Mirrors Missing
Glass No visible damage
Seat Belts Operational
Horn Operational
Safety Lock Out/Stop
Hydraulic Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Some missing
Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter 9767 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Inoperable; Controls levers not free to travel.
Heater Operational; Controls inoperable
Limited Function Check The main components operated except as noted.; Cab trim Damaged & Cracked in places.
Hour Meter
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minimal
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System Missing hardware; Exhaust manifold bolt missing
Oil Leaks Fluid Accumulation: Side of engine. Fluid Accumulation: Front of engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Emission Control Label
Drive Motors
Final Drives
Limited Function Check The drivetrain functioned without a load.
Drivetrain #1
Pumps (Hydraulics)
Hydraulic Tank Weld repair at outlet
Hoses (Hydraulics) 1 Auxiliary line not capped.
Auxiliary Hydraulic Plumbing Not operationally checked; End of stick; 1 Line not capped
Swing Motor
Hydraulic Center Swivel
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement; Visible movement in machine bores
Stick Cylinder Minor to moderate pin and bushing movement
Bucket Cylinder Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition Minor dents on bottom of boom
Stick Condition Minor dents on inside of stick; Crack at bucket pin boss
Boom Base Pin and Bushings Minor to moderate movement; Pin bores at machine have visible movement.
Pin and Bushings Boom to Stick Minor to moderate movement
Pin and Bushings Stick to Bucket Visible movement.
Turn-Table Bearing Seal torn & out of place
Bottom Covers Bent; Missing covers; Missing bolts
Roller Frames Rusty
Limited Function Check The main components were operational with movement as indicated.; Bucket linkage has visible wear.
Chassis #1
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads See photos for condition; Pieces missing on some track pads, see photos.
Track Tensioners See photos for condition
Grouser Height Left Side: 33 mm; Right Side: 33 mm
Track links See photos for condition
Pins and Bushings Turned? No
Pins and bushings See photos for condition; Noise during travel at times.
Carrier Rollers See photos for condition
Track Rollers See photos for condition
Idlers See photos for condition
Sprockets See photos for condition
Pins and bushings
Excavator Bucket Condition Worn thin; Dented; Weld repaired; Reinforced at stick connections.
Backhoe / Excavator Bucket Shanks and Teeth Scalloped edge between teeth; Weld repaired.
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis May 16, 2013 May 16, 2013
Silicon 7.94 PPM 20.37 PPM
Lead 0.63 PPM 0 PPM
Tin 0 PPM 0 PPM
Copper 1.27 PPM 12.27 PPM
Aluminum 3.09 PPM 3.79 PPM
Silver 0 PPM 0 PPM
Nickel 0.89 PPM 0.25 PPM
Chromium 10.5 PPM 4.61 PPM
Iron 35.15 PPM 21.29 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.