Home Page / 2007 Case 580M Series 2 4x4 Backhoe Loader
 

2007 Case 580M Series 2 4x4 Backhoe Loader (#450995)

Search for other Backhoe Loaders items

Winning Bid: US $38,000  
# of Bids: 37   View Bid History
Sold on: 5/23/13
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, Heater, Case 4 cyl 445/M2 Engine, 4x4, Extendable Stick, 83" Wide General Purpose Loader Bucket, 30" Rear Bucket.
Meter Reading: 1,783 Hours
Serial Number:
Location: New York, United States
Zip/Postal Code:11763
(Suffolk County)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Touch up paint; Scratches
Sheet Metal (Fiberglass) Condition Minor dents; Surface rust
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors No visible damage
Glass No visible damage
Seats/Armrests
Seat Belts Operational
Horn Operational
Drivetrain Controls
Steering Control
Transmission Disconnect Control
Hydraulic Controls
Backhoe Control Configuration Left stick (Boom and Swing) Right stick (Stick and Bucket)
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter 1,783 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
Interior
Limited Function Check The main components are in place and operational.
Hour Meter
 
Engine
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minimal
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System Rust penetration
Radiator Minor plugging of fins
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Front Drive Axle
Front Axle Oscillating Pin Wear Minor to moderate movement
Rear Drive Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Fluid accumulation
Hydraulic Tank
Hoses (Hydraulic)
Loader Lift Cylinders Minor to moderate pin and bushing movement
Bucket Tilt Cylinders Minor to moderate pin and bushing movement
Outrigger Cylinders Minor to moderate pin and bushing movement
Boom Swing Cylinders Minor to moderate pin and bushing movement
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Stick Cylinder Fluid accumulation; Minor to moderate pin and bushing movement
Bucket Cylinder Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational except as noted.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minor to moderate movement
Brake Type Hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake Stopped from a slow roll
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size 12-16.5 front tires; 16.9-24 rear tires; Front: Left: Solitek; Front: Right: Solitek; Solitek - All same brand.
Tire Condition Minor cuts and gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Tilt Linkage
Chassis to Arm Pins Minor to moderate movement
Tilt Linkage Pins and Bushings Minor to moderate movement
Bucket to Arm Pins Minor to moderate movement
Limited Function Check The main components were operational except as noted.
Boom Condition Minor dents on bottom of boom
Stick Condition Minor dents on inside of stick
Stick Extension Wear Guides Minor to moderate movement
Boom Lock (Backhoe)
Swing Tower Pivot Minor to moderate movement
Boom Base Pin and Bushings Minor to moderate movement
Pin and Bushings Boom to Stick Minor to moderate movement
Pin and Bushings Stick to Bucket Minor to moderate movement
Outriggers Street pads
Limited Function Check The main components were operational with movement as indicated.
Chassis #1
 
Specialty
Loader Bucket Condition
Loader Bucket Edge Reversible-not turned
Backhoe / Excavator Bucket Condition
Backhoe / Excavator Bucket Shanks and Teeth
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis May 02, 2013 May 02, 2013
Silicon 4.13 PPM 6.13 PPM
Lead 2.05 PPM 0 PPM
Tin 0 PPM 0 PPM
Copper 7.84 PPM 45.24 PPM
Aluminum 2.06 PPM 2.73 PPM
Silver 0 PPM 0.02 PPM
Nickel 0.12 PPM 0.41 PPM
Chromium 0.6 PPM 1.29 PPM
Iron 7.36 PPM 115.83 PPM
Glycol NEG NEG
Water NEG NEG
Fuel <5% <5%

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.