Home Page / Caterpillar 14G Motor Grader
 

Caterpillar 14G Motor Grader (#448937)

Search for other Motor Graders items

Winning Bid: US $51,000  
# of Bids: 10   View Bid History
Sold on: 6/6/13
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, Heater, Caterpillar 3306 Engine, 20.5R25 Tires, Ripper, 14' Blade.
Meter Reading: Meter Broken
Serial Number:
Location: West Virginia, United States
Zip/Postal Code:26739
(Grant County)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Paint Blemishes where decals have been removed; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Surface rust; Metal corrosion; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
 
Control Station
Mirrors
Glass
Seats/Armrests
Seat Belts Inoperable latch
Hydraulic Controls Worn; Some slow to respond. Saddle shift left rear is sluggish
Steering Control Minor to moderate steering wheel play
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Some inoperable
Warning Lights Operational; Alternator light stays on
Travel Alarm Inoperable
Gauges Operational; Some gauges could not be properly checked during a short operating period.
Hour Meter/Odometer 3,190 Hours; Inoperable hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Fan inoperable some or all speeds
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
 
Engine
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational; Fluid accumulation
Exhaust System No visible damage
Radiator Minor plugging of fins
Oil Leaks Fluid Accumulation: Valve cover. Fluid Accumulation: Side of engine. Fluid Accumulation: Oil Pan.
Fuel Leaks Fluid Accumulation: Fuel filter. Fluid Accumulation: Injection pump.
Cooling System Leaks Fluid Accumulation: Block or freeze plug.
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader) 8 speeds
Transmission Operational
Rear Drive Axle Fluid Accumulation
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Fluid accumulation
Valves Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics) Hoses at front of machine: Worn.
Hydraulic Motors Fluid accumulation
Steering Cylinders Minor to moderate pin and bushing movement
Articulation Cylinders Minor to moderate pin and bushing movement
Wheel Lean Cylinders Minor to moderate pin and bushing movement
Blade Lift Cylinders Heavy pin and bushing movement
Blade Angle Cylinders Heavy pin and bushing movement
Blade Side Shift Cylinders Heavy pin and bushing movement
Saddle Positioning Cylinder Heavy pin and bushing movement
Saddle Lock Pin Fluid accumulation
Limited Function Check The hydraulic system was operational except as noted. Saddle shift left rear is sluggish
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle)
Y-frame
Y-frame Pivot Trunnion
Circle Frame and Brackets Weld repair
Circle Wear Strips Moderate wear
Circle Support Brackets
Circle Gear Box Some slack
Circle Gear Minor wear
Mold Board Slide Wear Strips Moderate wear
Articulating Center Pins Wear Weld repair
Front Axle Oscillating Pin Wear Moderate movement
Steering Linkage Minor to moderate movement
Wheel Tilt Linkage
Belly pans
Limited Function Check (grader) The main components were operational with movement as indicated.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Stopped the machine while rolling
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands Left Front: Goodyear; Right Front: Goodyear; Right Middle: Michelin; Right Rear: Michelin; Left Rear: Michelin; Left Middle: Michelin
Tire Condition See photos; Cuts; Gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
 
Specialty
Blade Condition Worn
Blade Cutting Edge Condition (MG) Worn
Ripper Condition
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis May 21, 2013 May 21, 2013
Silicon 7.97 PPM 15.45 PPM
Lead 1.36 PPM 0.94 PPM
Tin 0 PPM 0 PPM
Copper 5.96 PPM 18.32 PPM
Aluminum 5.82 PPM 9.26 PPM
Silver 0 PPM 0.3 PPM
Nickel 0.32 PPM 0 PPM
Chromium 2.13 PPM 0.95 PPM
Iron 50.38 PPM 14.73 PPM
Glycol NEG N/A
Water NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.