Home Page / Caterpillar 14G Motor Grader
 

Caterpillar 14G Motor Grader (#448936)

Search for other Motor Graders items

Winning Bid: US $56,000  
# of Bids: 25   View Bid History
Sold on: 6/6/13
Auction Type: Featured Event
SOLD!
Features: Enclosed Cab, Heater, Caterpillar 3306 Engine, 20.5-25 Tires, Ripper, 14' Blade
Meter Reading: 3,557 Hours
Serial Number:
Location: Pennsylvania, United States
Zip/Postal Code:15613
(Pittsburgh area)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Blemishes where decals have been removed; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Dents; Surface rust; Bent panels; Missing panels; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors
Glass Cloudy
Seats/Armrests Damaged armrest
Seat Belts Inoperable latch; Inoperable retract
Hydraulic Controls Worn
Steering Control Minor to moderate steering wheel play
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises
Exterior Lights Operational No
Warning Lights Operational
Travel Alarm Operational
Hour Meter/Odometer 3,557 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Fan inoperable some or all speeds; Controls inoperable
Limited Function Check The main components operated except as noted.
Hour Meter/Odometer
 
Engine
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System No visible damage
Radiator Minor plugging of fins
Oil Leaks Fluid accumulation; Rear of engine; Oil pan
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader) 8 Speeds
Transmission
Rear Drive Axle Noisy when turning
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Not visually inspected
Valves Not visually inspected
Hydraulic Tank Sight glass leak/seepage
Hoses (Hydraulics) Hoses at front of machine & Hoses in mid section of machine & Hoses at rear of machine; Worn; Weathered; Some newer hoses
Hydraulic Motors Fluid accumulation
Steering Cylinders Minor to moderate pin and bushing movement
Articulation Cylinders Moderate pin and bushing movement
Wheel Lean Cylinders Minor to moderate pin and bushing movement
Blade Lift Cylinders Minor to moderate pin and bushing movement
Blade Angle Cylinders Minor to moderate pin and bushing movement
Blade Side Shift Cylinders Minor to moderate pin and bushing movement
Saddle Positioning Cylinder Minor to moderate pin and bushing movement
Saddle Lock Pin Fluid accumulation
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle)
Y-frame
Y-frame Pivot Trunnion Moderate movement
Circle Frame and Brackets
Circle Wear Strips Moderate wear
Circle Support Brackets
Circle Gear Box
Circle Gear
Mold Board Slide Wear Strips Moderate wear
Articulating Center Pins Wear Heavy movement
Steering Linkage Minor to moderate movement
Wheel Tilt Linkage Visible wear
Belly pans
Limited Function Check (grader) The main components were operational with movement as indicated.
Brake Type (Motorgrader) Air over hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Stopped the machine while rolling
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands Left front: General; Right front: General; Right middle: Alpha; Right rear: General; Left rear: Goodyear; Left middle: Titan
Tire Condition Cuts; Gouges; See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
 
Specialty
Blade Condition Worn
Blade Cutting Edge Condition (MG) Worn
Ripper Condition Missing teeth
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis May 14, 2013 May 14, 2013
Silicon 4 PPM 16 PPM
Lead 1 PPM 0 PPM
Tin 1 PPM 2 PPM
Copper 1 PPM 4 PPM
Aluminum 3 PPM 1 PPM
Silver 0 PPM 0.2 PPM
Nickel 1.5 PPM 0.3 PPM
Chromium 0.2 PPM 0.2 PPM
Iron 3 PPM 10 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.