Home Page / 2005 John Deere 310G 4x4 Backhoe Loader
 

2005 John Deere 310G 4x4 Backhoe Loader (#448701)

Search for other Backhoe Loaders items

Winning Bid: US $27,000  
# of Bids: 36   View Bid History
Sold on: 5/16/13
Auction Type: Featured Event
SOLD!
Features: Open Operator Station, John Deere 4045DT058 Engine, 4x4, Standard Stick, Rear Quick Coupler, 84" General Purpose Loader Bucket, 24" Rear Bucket.
Meter Reading: 2,885 Hours
Serial Number:
Location: Tennessee, United States
Zip/Postal Code:37921
(Knoxville area)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips
Sheet Metal (Fiberglass) Condition Dents; Hood is damaged; Grille bent; Left rear fender damage
Steps/Ladders See photos for condition; Right side slightly bent
Hand Rails No visible damage
General Appearance #1
 
Control Station
Seats/Armrests Lower frame cover torn
Seat Belts Operational
Horn Operational
Drivetrain Controls
Steering Control
Transmission Disconnect Control
Hydraulic Controls
Backhoe Control Configuration Left stick (Boom and Swing) Right stick (Stick and Bucket)
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational; Cover has damage
Travel Alarm Operational
Gauges Operational
Hour Meter 2,885 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Interior Wear
Limited Function Check The main components are in place and operational.
Hour Meter
 
Engine
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minor
Starter Operational
Fuel System Operational
Exhaust System Tip of pipe is bent
Radiator
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational; Fluid accumulation
Front Drive Axle
Front Axle Oscillating Pin Wear Minor to moderate movement
Rear Drive Axle
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulic)
Loader Lift Cylinders Minor to moderate pin and bushing movement
Bucket Tilt Cylinders Fluid accumulation; Minor to moderate pin and bushing movement
Outrigger Cylinders Chrome damage on the left cylinder; Chrome damage on the right cylinder
Boom Swing Cylinders
Boom Lift Cylinder(s)
Stick Cylinder
Bucket Cylinder
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minor to moderate movement; Damaged dust boots
Brake Type Hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size 12-16.5 Front tires; 19.5L-24 Rear tires; Front: Left: Xtra Wall; Front: Right: Samson; Rear: Left: Duramax; Rear: Right: YKS
Tire Condition See photos; Cuts; Gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Tilt Linkage
Chassis to Arm Pins Minor to moderate movement
Tilt Linkage Pins and Bushings Minor to moderate movement
Bucket to Arm Pins Minor to moderate movement
Limited Function Check The main chassis components were operational in a limited check.
Boom Condition Minor dents on bottom of boom
Stick Condition
Boom Lock (Backhoe)
Swing Tower Pivot Minor to moderate movement
Boom Base Pin and Bushings Minor to moderate movement
Pin and Bushings Boom to Stick Minor to moderate movement
Pin and Bushings Stick to Coupler Minor to visible movement
Outriggers Reversible; Street pads are worn
Limited Function Check The main components were functional in a limited check.
Chassis #1
 
Specialty
Loader Bucket Condition Dented; Left side is bent
Loader Bucket Edge Reversible-not turned
Backhoe / Excavator Bucket Condition
Backhoe / Excavator Bucket Shanks and Teeth
Rear Quick Coupler Manual rear coupler; Some wear between coupler and bucket
Specialty #1
Oil Sample Analysis engine transmission
date of analysis May 07, 2013 May 07, 2013
Silver 0.2 PPM 0.3 PPM
Water 0 0
Aluminum 5 PPM 1 PPM
Chromium 0.3 PPM 0.2 PPM
Nickel 1.4 PPM 1.1 PPM
Copper 58 PPM 31 PPM
Iron 11 PPM 19 PPM
Silicon 3 PPM 1 PPM
Glycol 0 0
Tin 1 PPM 0 PPM

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.