Home Page / 2005 JCB 508C Telehandler

2005 JCB 508C Telehandler (#448699)

Search for other Telehandlers items

Winning Bid: US $26,500  
# of Bids: 50   View Bid History
Sold on: 5/23/13
Auction Type: Featured Event
Features: 8,000 lb. Max Weight Capacity, 42' Max Lift Height, 48" Forks, Frame Leveling, JBC 444T2 Diesel Engine, 4x4 w/3 Way Steering, Open Operator Station, 13.00-24 Tires
Meter Reading: 444 Hours
Serial Number:
Location: Alabama, United States
Zip/Postal Code:35217
(Birmingham area)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
General Appearance
CE Mark (on or near data plate) Yes
Paint Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Surface rust; See photos for condition
Steps/Ladders No visible damage
Hand Rails No visible damage
General Appearance #1
Control Station
Glass No visible damage
Seat Belts Operational
Horn Operational
Hydraulic Controls Damaged boots
Steering Control Minor to moderate steering wheel play
Drivetrain Controls
Load Charts Posted on cab wall
Oil Pressure No oil pressure indicator
Exterior Lights Operational Yes
Travel Alarm Operational
Gauges Operational
Hour Meter/Odometer 444 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The main components are in place and operational.
Hour Meter/Odometer
Emission Control Label Torn or unreadable
Blow by @ idle (subjective observation) Minimal
Starter Operational
Turbo or Blower Fluid Accumulation
Fuel System Operational
Exhaust System No visible damage
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran.
Blow by @ idle (subjective observation)
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Front Drive Axle
Front Axle Oscillating Pin Wear Minor to moderate movement
Rear Drive Axle
Rear Axle Oscillating Pin Wear Minor to moderate movement
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
Pumps (Hydraulics)
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing Not operationally checked; Front
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Telescopic Boom Cylinders
Mast Tilt Cylinders Minor to moderate pin and bushing movement
Carriage Tilt Cylinder Minor to moderate pin and bushing movement
Frame Leveling Cylinders Minor to moderate pin and bushing movement
Steering Cylinders Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Chain / Tensioners
Rollers and Guides Worn guides
Boom Wear Guides
Steering Linkage Minor to moderate movement
Frame Condition Surface Rust
Limited Function Check The main chassis components functioned during a limited check.
Brake Control
Park Brake
Limited Function Check The brake system functioned, stopping and holding the machine.
Tire Brands Brands: Solideal
Tire Condition See photos; Minor cuts and gouges; Foam filled
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Load Back Rest
Forks 48" forks
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis May 10, 2013 May 10, 2013
Silicon 15 PPM 14 PPM
Lead 1 PPM 1 PPM
Tin 3 PPM 1 PPM
Copper 32 PPM 4 PPM
Aluminum 10 PPM 9 PPM
Silver 0.2 PPM 0 PPM
Nickel 0.7 PPM 0.7 PPM
Chromium 0.8 PPM 0.1 PPM
Iron 27 PPM 4 PPM
Glycol NEG N/A
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.