Home Page / 2009 Komatsu PC88MR-8 Mini Excavator
 

2009 Komatsu PC88MR-8 Mini Excavator (#443143)

Search for other Excavators items

Winning Bid: US $50,000
Won using: Win It Now
 
# of Bids: 1   View Bid History
Sold on: 5/17/13
Auction Type: Daily Marketplace
SOLD!
Features: Enclosed Cab, Heater, Control Pattern Changer, Komatsu Engine, 7' Stick, 18" Track Shoes, Swing Boom, Auxiliary Hydraulic Plumbing, Manual Quick Coupler, 18" Tooth Bucket, Hydraulic Thumb, 91" Wide Straight Blade
Meter Reading: 2,727 Hours
Serial Number:
Location: New Jersey, United States
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Sheet Metal (Fiberglass) Condition Bends; Dents; Scratches; See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors Missing
Glass Track Broken; Missing lower front; See photos for condition
Seats/Armrests See photos for condition
Seat Belts Operational
Horn Operational
Safety Lock Out/Stop
Hydraulic Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises
Exterior Lights Operational Yes; Some inoperable
Warning Lights Operational
Travel Alarm Inoperable
Gauges Operational
Hour Meter 2,727 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Ambient temperature too cold to check
Heater Operational
Limited Function Check The main components are in place and operational.
Hour Meter
 
Engine
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minimal
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System See photos for condition
Radiator
Oil Leaks Fluid accumulation; Side of engine; Valve cover; Minor
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran. See oil report.
Emission Control Label
 
Drivetrain
Drive Motors
Final Drives
Limited Function Check The drivetrain functioned without a load.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Fluid accumulation
Hydraulic Tank Fluid accumulation
Auxiliary Hydraulic Plumbing Operational; End of stick
Swing Motor
Hydraulic Center Swivel Not visually inspected
Boom Swing Cylinders Minor to moderate pin and bushing movement
Boom Lift Cylinder(s) Fluid accumulation; Minor to moderate pin and bushing movement
Stick Cylinder Minor to moderate pin and bushing movement
Bucket Cylinder Seepage; Chrome damage; Minor to moderate pin and bushing movement
Blade Lift Cylinder Fluid accumulation; Minor to moderate pin and bushing movement
Limited Function Check See oil report.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition Minor dents on bottom of boom
Stick Condition Minor dents on inside of stick
Swing Tower Pivot Minor to moderate movement
Boom Base Pin and Bushings Minor to moderate movement
Pin and Bushings Boom to Stick Minor to moderate movement
Pins and Bushings Stick to Coupler Minor to moderate movement
Turn-Table Bearing Performs within tolerance expected for age and hours
Bottom Covers Oily
Roller Frames
Limited Function Check The main components were functional in a limited check.
Chassis #1
 
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads See photos for condition
Track Tensioners See photos for condition
Track links See photos for condition
Pins and Bushings Turned? No
Pins and bushings See photos for condition
Carrier Rollers See photos for condition
Track Rollers See photos for condition
Idlers See photos for condition
Sprockets See photos for condition
Track Pads See photos for condition
Pins and bushings
 
Specialty
Excavator Bucket Condition
Backhoe / Excavator Bucket Shanks and Teeth Scalloped edge between teeth; Minor wear
Quick Coupler Manual coupler; Not operationally checked
Blade Condition Dented
Blade Cutting Edge Condition Worn
Thumb Hydraulic thumb
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Apr 02, 2013 Apr 02, 2013
Silicon 9 PPM 2 PPM
Lead 5 PPM 2 PPM
Tin 11 PPM 3 PPM
Copper 140 PPM 24 PPM
Aluminum 5 PPM 3 PPM
Silver 0.1 PPM 0.1 PPM
Nickel 1.8 PPM 1 PPM
Chromium 3.1 PPM 0.3 PPM
Iron 40 PPM 13 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.