Home Page / 2011 Caterpillar D8T Crawler Tractor
 

2011 Caterpillar D8T Crawler Tractor (#442931)

Search for other Crawler Tractors items

Winning Bid: US $415,000
Won using: Win It Now
 
# of Bids: 1   View Bid History
Sold on: 5/28/13
Auction Type: Daily Marketplace
SOLD!
Features: 3 Position Ripper, 2 Shanks Included, 148" Wide, Single Cylinder Tilt Semi-U Blade, Enclosed Cab, A/C, Heater, Differential Steering, Ripper Control, Caterpillar C16 Engine, 24" Track Shoes. "Seller Comments" Wired for Trimble GPS System. Please see the attached Spec sheet and emissions data below. Fuel slobber on exhaust has been repaired, see the repair invoice below.
Meter Reading: 2,551 Hours
Serial Number:
Location: Utah, United States
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint See photos for condition
Sheet Metal (Fiberglass) Condition See photos for condition
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors
Glass See photos for condition; Damaged weather stripping
Seats/Armrests See photos for condition
Seat Belts Operational
Horn Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Operational
Gauges Some gauges could not be properly checked during a short operating period.
Hour Meter/Odometer 2,551 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner The ambient temperature is too cold to check.
Heater Operational
Interior See photos
Limited Function Check Some components could not be operationally checked.
Hour Meter/Odometer
 
Engine
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System See photos for condition
Radiator Shroud damage
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Fluid accumulation
Travel Speeds 3
Steering Brakes
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track) The drivetrain was operational without a load. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Fluid accumulation
Valves Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics) Blade cylinder hoses: Worn; Ripper cylinder hoses: Worn
Blade Lift Cylinders Minor to moderate pin and bushing movement
Blade Tilt Cylinders Chrome damage on the right cylinder; Minor to moderate pin and bushing movement
Ripper Cylinders Dripping leak on the left cylinder; Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Roller Frames Rusty
Belly pans
Pivot Shafts
Equalizer Bar Pivot Points Minor wear
Limited Function Check (Chassis) The components that were checked were operational except as noted.
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions Shims remaining
Tilt Linkage Pins and Bushings Minor to moderate movement
Blade Trunnions/bushings Minimal movement
Limited Function Check (dozer) The main components were operational with movement as indicated.
Chassis #1
 
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Track Pads See photos for condition
Track Tensioners See photos for condition
Grouser Height Left Side: 48 mm; Right Side: 48 mm
Track links See photos for condition
Pins and Bushings Turned? No
Pins and bushings See photos for condition
Carrier Rollers See photos for condition
Track Rollers See photos for condition
Idlers See photos for condition
Sprockets See photos for condition
Undercarriage #1
 
Specialty
Blade Condition Worn; Cracked welds; Weld repair
Blade Cutting Edge Condition Reversible-Not turned
Ripper Condition Pivot pin wear
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Apr 02, 2013 Apr 02, 2013
Silicon 0 PPM 8 PPM
Lead 0 PPM 2 PPM
Tin 1 PPM 4 PPM
Copper 3 PPM 22 PPM
Aluminum 2 PPM 2 PPM
Silver 0 PPM 0 PPM
Nickel 2.1 PPM 1.7 PPM
Chromium 0 PPM 0.2 PPM
Iron 4 PPM 19 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.