Home Page / National 666B Straight Boom on 1993 Freightliner FLC112SD T/A Truck
 

National 666B Straight Boom on 1993 Freightliner FLC112SD T/A Truck (#442062)

Search for other Trucks - Boom items

Winning Bid: US $15,000  
# of Bids: 8   View Bid History
Sold on: 8/5/13
Auction Type: Daily Marketplace
SOLD!
Features: Behind The Cab Mount, National 666B Boom, 28,000 lb. Capacity, 76' Sheave Height, Non-Insulated, Telescopic Boom, Caterpillar 3406C DITA Engine, 350 Adv. Horsepower, Eaton Fuller 8LL Manual Transmission, 255" Wheel Base, 425/65R22.5 Front Tires, 11R24.5 Rear Tires, 20,000 lb. Capacity Front Axle, 40,000 lb. Capacity Rear Axles, 60,000 lb. GVWR
Mileage: 1,180,538 Miles
VIN:
Location: California, United States
Shipping: Get a shipping estimate and see important pickup terms
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced. Free of visible wear or defects.
Performs within the tolerances expected for age and type of item.
Although performing, shows indication of needing repair or replacement.
Needs immediate repair/replacement. Requires work if it is to perform
as expected.
 
General Appearance
Federal Motor Vehicle Standards Compliance Label No
Safety Certification Label There is a safety certification label with a date of 10/1/2007
Safety Certification Report Safety Certification Report Available - IronPlanet in no way guarantees the validity or accuracy of any safety related documents or labels associated with this item. We strongly recommend a safety inspection is performed before using this item.
Load Chart Yes
CE Mark (on or near data plate) No
Paint Not original paint; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition Broken hood latches on both sides; See photos for condition
Steps/Ladders Bent; See photos for condition
Hand Rails No visible damage
General Appearance #1
 
Control Station
Mirrors
Glass Chipped: Front, Left
Window Controls Both Manual
Upholstery
Seats/armrests Torn
Seat Belts Operational
Horn Air: Operational; Electric: Operational
Oil Pressure The gauge registers in the operating range.
Exterior Lights Operational Yes
Warning Lights Operational
Travel Alarm Inoperable
Gauges Operational
Max. Air Pressure Reading 120 psi
Hour Meter/Odometer 1,180,538 Miles; 8,915 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Operational
Heater Operational
Limited Function Check The main components are in place and operational.
Hour Meter/Odometer
 
Engine
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Air Compressor - Truck Operational
Turbo or Blower No visible damage
Fuel System Operational
Exhaust System No visible damage
Radiator Minor plugging of fins
Oil Leaks Fluid Accumulation: Side of engine
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Clutch Engages
Drive Shaft
Power Take Off Air operated; Operational
Steer Axle
Front Drive Axle
Rear Drive Axle
Limited Function Check The drivetrain was operational without a load.
Drivetrain #1
 
Hydraulics
See photos for condition
Pumps (Hydraulics)
Valves Not visually inspected
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Main Hoist
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement
Boom Extension Cylinder Minor to visible pin and bushing movement
Stabilizer Cylinders Minor to moderate pin and bushing movement
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minor to moderate movement
Steering Wheel Play Minor to moderate movement
Brake Type Air
Brake Lines/Hoses
Park Brake Held against power
Limited Function Check The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
External Electrical / Air Connections Not operationally checked
Fifth Wheel Sliding 5th wheel
Frame Condition Doubled / reinforced
Tire Size 425/65R22.5 Front tires; 11R24.5 Rear tires; Bridgestone
Tire Condition Minor cuts and gouges; See photos
Tread Depth LF 16 /32"; LMI 20 /32"; LMO 26 /32"; LRI 10 /32"; LRO 20 /32"; RRI 25 /32"; RRO 26 /32"; RMI 25 /32"; RMO 26 /32"
Wheel Condition
Wheel Studs
Dielectric Certification There was no Dielectric Certification label located on the machine
Turn-Table Bearing Performs within tolerance expected for age and hours
Boom Condition
Boom Wear Guides Worn thin
Stabilizer Beams
Stabilizer Controls
Chassis #1
 
Boom Controls
Control Console
Hydraulic Controls
Gauges Operational
Limited Function Check The main components are in place and operational.
Boom Controls #1
Oil Sample Analysis Engine Hydraulic
date of analysis Mar 21, 2013 Mar 21, 2013
Silicon 5 PPM 1 PPM
Lead 1 PPM 0 PPM
Tin 0 PPM 0 PPM
Copper 1 PPM 3 PPM
Aluminum 1 PPM 3 PPM
Silver 0 PPM 0 PPM
Nickel 2.3 PPM 0.5 PPM
Chromium 0 PPM 0.5 PPM
Iron 2 PPM 6 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2014 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet®, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.