• |
  • 888-433-5426
  • |
  • English
 Home Page / Agriculture / 2004 Terex TX760B 4x4 Backhoe Loader
 

2004 Terex TX760B 4x4 Backhoe Loader (#236089)

[Add this item to your watchlist] [Email to a Friend]

Opens At US $15,000  
Auction: Dec 10 (time TBD)

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Enclosed cab with heater, Perkins 2164/2200 engine, floor shift w/shuttle lever, aux. hyd. plumbing, extendable stick, 24" rear bucket, 91" loader bucket
Meter Reading: 1,184 Hours
Serial Number: SMFH44TC04DFM3292
Location: Maine, United States
Zip/Postal Code: 04102
(Portland area)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN SMFH44TC04DFM3292
Paint Scratches; Chips
Sheet metal (fiberglass) condition The sheet metal is dented and scraped. The front end is scraped and rusty. There is rust in the paint loss areas.
Serial Number / VIN
 
Control Station
Hydraulic Controls Damaged Boots
Backhoe Control Configuration 2 lever (Deere) style
Steps/Ladders The left side steps are bent.
Hand Rails
Mirrors
Glass There has been repair to the door frame.
Seats/Armrests Burn holes; Worn
Seat Belts
Horn Functional
Powertrain Controls
Steering Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer 1184 - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Functional
Disconnect Control Push button disconnect; Gear shift and loader control
Limited Function Check (cs) The main components functioned during a limited check.
Hour Meter/Odometer
 
Engine
Engine Make and Model Engine make: Perkins; Serial #: U140138L; Family: 4PKXL04.4RG1; Engine Type: 2164/2200
Fuel Type Diesel
Emission Control Label US EPA certification label; Other California
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Rusty
Injector Pump Operational
Exhaust System
Radiator Minor plugging of fins; Fin damage on the oil cooler
Head Gasket Leaks None seen
Oil Leaks There is seepage at the oil pan and the front of the engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Torque Converter Functional
Differential (front)
Differential (rear)
Final Drives There is seepage at the right front final drive.
Limited Function Check The drivetrain functioned during a limited check without a load.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Wet with residue
Hydraulic Tank Oily residue
Hoses (Hydraulics) Loose from brackets; Part of the bracket is missing.
Auxiliary Hydraulic Plumbing Yes
Cylinders Leak; Seepage; Ram Chrome Damage
Cylinder Pins and Bushings Wear consistent with hours and age; There is concrete residue buildup around the bucket to loader arms.
Limited Function Check The hydraulic system was operational with leaks during a limited check without a load. See oil report.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Wear consistent with hours and age
Steering Wheel Play Minor
Brake Type Hydraulic
Master Cylinder/Brake Control Soft pedal
Brake Lines/Hoses
Park Brake Held on slope; Did not hold against power
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine. The inspector noted the brakes must be pushed hard to stop the machine.
Frame Condition
Tire Size (4) 12.5x80x18 front tires; 19.5L-24 rear tires; Brands: Terex and Constellation
Tire Condition Cuts; Gouges
Tread Depth (4 tires) RF 8.2 mm; LF 7.8 mm; RR 15 mm; LR 16 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition Rusty
Chassis to Arm Pins Wear consistent with hours and age
Tilt Linkage Pins and Bushings Minor wear; Wear consistent with hours and age
Bucket to Arms Pins Minor wear; Wear consistent with hours and age
Limited Function Check (rt machines) The main chassis components functioned during a limited check.
Boom Condition Scratched
Stick Condition Scratched
Stick Type Extendable stick
Extendahoe Stick Guide Visible slack; Heavy wear
Boom Lock (Backhoe) Heavy weld repair.
Boom Base Pin and Bushings Heavy wear; Visible slack
Pin and Bushings Boom to Stick Wear consistent with hours and age; Visible slack
Pin and Bushings Stick to Bucket Wear consistent with hours and age; Visible slack
Outriggers Street pads; Scratched
Stabilizer Cylinders Seepage; Ram Chrome Damage; Weld repair on the pad to the stabilizer bushing.
Limited Function Check (Backhoe) The main components were functional with visible pivot point wear.
Chassis #1
 
Specialty
Backhoe / Excavator Bucket Condition 24" Rear bucket; Dented
Backhoe / Excavator Bucket Cutting Edge Missing tooth
Loader Bucket Cutting Edge Reversible-Not turned
Loader Bucket Condition 91" loader bucket; Dented
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Nov 04, 2009 Nov 04, 2009
Silicon 1 PPM 9 PPM
Lead 0 PPM 3 PPM
Tin 0 PPM 1 PPM
Copper 1 PPM 123 PPM
Aluminum 1 PPM 2 PPM
Silver 0 PPM 0 PPM
Nickel 0.1 PPM 0 PPM
Chromium 0 PPM 0.3 PPM
Iron 6 PPM 5 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Maine, United States
  • Zip/Postal Code: 04102 (Portland area)
  • The purchase of this item is subject to Maine sales tax unless certain conditions are met.
  • Hours: 8 - 4 Mon - Fri
  • Call at least one day in advance to schedule pickup.
  • NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.