Minor dents and scrapes; There is surface rust in the paint loss areas. Weld repairs
Serial Number / VIN
Control Station
Gauges
Functional; Difficult to read
Hour Meter/Odometer
Functional 699 Hours; The glass is broken out.
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)
The components that were checked functioned except as noted.
Hour Meter/Odometer
Engine
Engine Make and Model
Briggs Stratton 227CC
Fuel Type
Gasoline
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Exhaust System
Head Gasket Leaks
None seen
Oil Leaks
None seen
Fuel Leaks
None seen
Limited Function Check
The engine started and ran during a limited check. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational during a limited check without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cylinders
Cylinder Pins and Bushings
Wear consistent with hours and age
Limited Function Check
The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Suspension Trunions
Minor wear
Limited Function Check
The main chassis components functioned during a limited check.
Brake Type
Hydrostatic
Park Brake
Held on slope
Limited Function Check (Brakes)
The brake system functioned, stopping and holding the machine.
Trencher Bar Length
40"
Trenching Boom
Pins and Bushings On Boom
Cutting Bits
Roller Bushings
Crummer Bar
Auger Condition
Chain / Sprocket Condition
Loose
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes)
41"
Track Tensioners
See photos
Shoe Width
10"
Grouser height
24mm
Track link wear
Not visible
Pins and Bushings Turned?
No
Pins and bushing wear
See photos
Carrier rollers wear
See photos
Track rollers wear
See photos
Front idler wear
See photos
Sprockets
See photos
Undercarriage #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Oct 29, 2009
Oct 29, 2009
Silicon
19 PPM
2 PPM
Lead
1 PPM
1 PPM
Tin
0 PPM
0 PPM
Copper
16 PPM
10 PPM
Aluminum
8 PPM
1 PPM
Silver
0 PPM
0 PPM
Nickel
0.6 PPM
0 PPM
Chromium
2.6 PPM
0.1 PPM
Iron
31 PPM
2 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
>5%
N/A
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
Location: Louisiana, United States
Zip/Postal Code: 70611
(Lake Charles area)
The purchase of this item is subject to Louisiana sales tax unless certain conditions are met.
Hours: Mon- Fri 8AM-4PM
Call at least one day in advance to schedule pickup.
Loading Dock Available.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
$50/per day, per item storage fee will be assessed after 10 days
888-433-5426
