• |
  • 888-433-5426
  • |
  • English
 Home Page / Location=" MI " / 2001 Caterpillar 430D 4x4 Backhoe Loader
 

2001 Caterpillar 430D 4x4 Backhoe Loader (#235395)

[Email to a Friend] [View all items in this Public Auction]

SOLD!
Winning Bid: US $23,500  

 Sold on: 11/12/09
 # of Bids: 10
 Buyer From: Florida

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Enclosed cab with A/C components and heater, Cat 3054 engine, 4x4, powershift, E-stick, 18" rear bucket, 89" loader bucket. Buyer will be liable for storage and removal fees if equipment is not removed within 14 days from the sale.
Meter Reading: 3,687 Hours
Serial Number: BNK00882
Location: Idaho, United States
Zip/Postal Code: 83642
(Boise City area)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN BNK00882
Paint There is new paint in some areas; The paint is scratched and chipped.
Sheet metal (fiberglass) condition There are minor dents and scrapes on the sheet metal. There is surface rust in the paint loss areas .
Serial Number / VIN
 
Control Station
Hydraulic Controls
Backhoe Control Configuration 2 Lever (Cat) Excavator Style
Steps/Ladders
Hand Rails
Mirrors
Glass Missing/inoperable wiper
Seats/Armrests Dirty
Seat Belts Dirty
Horn Functional
Powertrain Controls
Steering Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Functional
Travel Alarm Weak
Gauges Functional
Hour Meter/Odometer Functional; 3,687 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Functional; Cool but not cold
Heater Functional
Disconnect Control
Limited Function Check (cs) The main components were functional with wear and damage as noted.
Hour Meter/Odometer
 
Engine
Engine Make and Model Engine make: Cat; 3054 engine; Serial #: 7BJ51982
Fuel Type Diesel
Emission Control Label US EPA certification label
Block Heater No
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None seen
Oil Leaks Oil and dirt residue on the sides and bottom of the engine and the drivetrain
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Wet with residue
Torque Converter Feels normal
Differential (front)
Differential (rear) Differential lock
Final Drives
Limited Function Check The drivetrain functioned during a limited check without a load.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Wet with residue
Valves Residue
Hydraulic Tank
Hoses (Hydraulics) Weathered; Cracked
Cylinders
Cylinder Pins and Bushings Loose
Limited Function Check The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Wear consistent with hours and age
Steering Wheel Play Minor
Brake Type Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Held on slope
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4) 12.5 R 18 front tires; 19.5 L 24 rear tires; Front: Right: Michelin; Front: Left: Michelin; Rear: Right: Goodyear; Rear: Left: Goodyear
Tire Condition Cuts; Gouges; Low air
Tread Depth (4 tires) RF 7 mm; LF 7 mm; RR 20 mm; LR 14 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition Weld repair; Cracks
Chassis to Arm Pins Loose
Tilt Linkage Pins and Bushings Loose
Bucket to Arms Pins Loose
Limited Function Check (rt machines) The main components were operational with wear and damage.
Boom Condition Dented; Scratched; Weld repair; Damaged
Stick Condition Dented; Scratched; Weld repair; Damaged
Stick Type Extendable stick
Extendahoe Stick Guide Minor wear
Boom Lock (Backhoe)
Boom Base Pin and Bushings Heavy wear
Pin and Bushings Boom to Stick Wear consistent with hours and age
Pin and Bushings Stick to Coupler Heavy wear
Outriggers Street pads
Stabilizer Cylinders Ram Chrome Damage
Limited Function Check (Backhoe) The main components were functional with wear and damage as noted.
Chassis #1
 
Specialty
Backhoe / Excavator Bucket Condition 18" Rear bucket; Dented
Backhoe / Excavator Bucket Cutting Edge Scalloped edge between teeth; Worn teeth
Quick Coupler Manual coupler; Functional; Wear at pin connections
Loader Bucket Cutting Edge Reversible-turned; Worn
Loader Bucket Condition 89" loader bucket; Worn; Worn thin; Holes; Dented; Cracked; There are hooks welded to the top of the bucket.
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Oct 28, 2009 Oct 28, 2009
Silicon 12 PPM 8 PPM
Lead 2 PPM 1 PPM
Tin 2 PPM 0 PPM
Copper 2 PPM 7 PPM
Aluminum 4 PPM 2 PPM
Silver 0 PPM 0 PPM
Nickel 0.1 PPM 0.4 PPM
Chromium 0.4 PPM 0.2 PPM
Iron 31 PPM 15 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Idaho, United States
  • Zip/Postal Code: 83642 (Boise City area)
  • The purchase of this item is subject to Idaho sales tax unless certain conditions are met.
  • Hours: Mon-Fri 8-4
  • Call at least one day in advance to schedule pickup.
  • Loading Dock Available.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...