| Inspection Ratings Key |
 |
New or recently replaced |
 |
Performs within the tolerances expected for age and type of equipment |
 |
Although performing, shows indication of needing repair or replacement |
 |
Needs immediate repair/replacement. Requires work if it is to perform as expected |
|
|
| |
| General Appearance |
| Serial Number / VIN |
|
|
| CE Certification Label |
|
|
| Paint |
 |
|
| Sheet metal (fiberglass) condition |
 |
|
|
Serial Number / VIN
|
| |
| Control Station |
| Steps/Ladders |
 |
|
| Hand Rails |
 |
|
| Seats/Armrests |
 |
|
| Seat Belts |
 |
|
| Horn |
|
|
| Disconnect Control |
 |
|
| Hydraulic Controls |
 |
|
| Steering Controls |
 |
|
| Oil Pressure |
|
|
| Exterior Lights Functional |
|
|
| Engine Warning Lights |
|
|
| Travel Alarm |
|
|
| Gauges |
|
|
| Hour Meter/Odometer |
|
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
|
| Limited Function Check (cs) |
|
|
|
Hour Meter/Odometer
|
| |
| Engine |
| Engine Make and Model |
|
|
| Fuel Type |
|
|
| Emission Control Label |
|
|
| Blow by @ idle (subjective observation) |
|
|
| Starter |
 |
|
| Turbo or Blower |
|
|
| Injector Pump |
|
|
| Exhaust System |
 |
|
| Radiator |
 |
|
| Head Gasket Leaks |
|
|
| Oil Leaks |
|
|
| Fuel Leaks |
|
|
| Cooling System Leaks |
|
|
| Limited Function Check |
|
|
|
Emission Control Label
|
| |
| Drivetrain |
| Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage. |
| Travel Speeds |
|
|
| Service Brakes |
 |
|
| Final Drives |
 |
|
| Limited Function Check (Drivetrain-Track) |
|
|
|
Drivetrain #1
|
| |
| Hydraulics |
| Pumps (Hydraulics) |
 |
|
| Valves |
 |
|
| Hydraulic Tank |
 |
|
| Hoses (Hydraulics) |
 |
|
| Cylinders |
 |
|
| Cylinder Pins and Bushings |
 |
|
| Limited Function Check |
|
|
|
Hydraulics #1
|
| |
| Chassis |
| IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed. |
| Roller Frames |
 |
|
| Belly pans |
 |
|
| Pivot Shafts |
 |
|
| Equalizer Bar Pivot Wear |
 |
|
| Push arm/C-frame condition |
 |
|
| Tilt/angle Linkage Pins and Bushings |
 |
|
| Blade Trunnions/bushings |
 |
|
| Blade Lift Linkage Pins and Bushings |
 |
|
| Limited Function Check (dozer) |
|
|
|
Chassis #1
|
| |
| Undercarriage |
| Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail. |
| Overall width (outside to outside of shoes) |
|
|
| Track Tensioners |
|
|
| Shoe Width |
|
|
| Grouser height |
|
|
| Track link wear |
|
|
| Pins and Bushings Turned? |
|
|
| Pins and bushing wear |
|
|
| Carrier rollers wear |
|
|
| Track rollers wear |
|
|
| Front idler wear |
|
|
| Sprockets |
|
|
|
Undercarriage #1
|
| |
| Specialty |
| Blade Condition |
 |
|
| Blade Cutting Edge Condition |
 |
|
| Drawbar |
 |
|
|
Specialty #1
|
| Oil Sample Analysis |
transmission |
Engine |
hydraulic |
| date of analysis |
Nov 03, 2009 |
Nov 03, 2009 |
Nov 03, 2009 |
| Lead |
9 PPM |
0 PPM |
9 PPM |
| Silver |
0 PPM |
0 PPM |
0.1 PPM |
| Water |
0 |
NEG |
0 |
| Aluminum |
1 PPM |
1 PPM |
7 PPM |
| Chromium |
0.4 PPM |
0.4 PPM |
0.5 PPM |
| Nickel |
0.2 PPM |
0 PPM |
1.1 PPM |
| Copper |
127 PPM |
3 PPM |
324 PPM |
| Iron |
65 PPM |
6 PPM |
27 PPM |
| Silicon |
33 PPM |
4 PPM |
36 PPM |
| Glycol |
0 |
NEG |
0 |
| Tin |
3 PPM |
0 PPM |
2 PPM |
| Fuel |
|
<5% |
|