• |
  • 888-433-5426
  • |
  • English
 Home Page / Construction / 2008 Komatsu D155AX-6 Track Dozer w/ Ripper
 

2008 Komatsu D155AX-6 Track Dozer w/ Ripper (#235229)

[Email to a Friend] [View all items in this Public Auction] 		Print Equipment Brochure  Print Equipment Brochure
Financing Available for this Item

SOLD!
Winning Bid: US $276,000  

• Sold on: 11/12/09
• # of Bids: 59
• Buyer From: Oklahoma

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Enclosed cab with A/C and heater, sweeps, Komatsu SAA6D140E-5 engine, Torqflow transmission, 26" track shoes, 154 1/2" blade, ripper-1 shank
Meter Reading: 1,080 Hours
Serial Number: 80433
Location: Arkansas, United States
Zip/Postal Code: 72209
(Little Rock-North Little Rock area) 		 
  Request shipping quote or additional assistance with transportation
More Shipping Details 		 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
Protected by IronClad Assurance®
 
General Appearance
Serial Number / VIN 80433
Paint Scratches; Chips; Faded
Sheet metal (fiberglass) condition Minor dents/ scrapes; Surface rust in paint loss areas
Serial Number / VIN
 
Control Station
Steps/Ladders
Hand Rails
Mirrors
Glass
Seats/Armrests
Seat Belts
Horn Functional
Control Lock Lever
Disconnect Control
Hydraulic Controls
Steering Controls
Powertrain Controls
Oil Pressure In safe range PSI
Exterior Lights Functional Yes
Engine Warning Lights Functional
Travel Alarm Weak
Gauges Functional
Hour Meter/Odometer Functional; 1,080 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Functional
Heater Functional
Limited Function Check (cs) The main components functioned during a limited check. The interior of the cab is dirty.
Hour Meter/Odometer
 
Engine
Engine Make and Model Engine make: Komatsu SAA6D140E-5 engine; Serial #: 7KLXL15.2E06
Fuel Type Diesel
Emission Control Label US EPA certification label
Block Heater No
Blow by @ idle (subjective observation) None
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None seen
Oil Leaks Oil residue; Low oil level
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track) The drivetrain was operational during a limited check without a load.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cylinders
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Roller Frames
Belly pans Oil residue
Equalizer Bar Pivot Wear
Limited Function Check (loader) The main components were operational with wear.
Push arm/C-frame condition
Push Arm Trunnions
Tilt/angle Linkage Pins and Bushings Minor wear
Blade Trunnions/bushings
Blade Lift Linkage Pins and Bushings
Limited Function Check (dozer) The main components were operational with wear. There is oil residue on the sides of the chassis above equalizer bar.
Chassis #1
 
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes) 110 1/2" Overall width
Track Tensioners See photos; Loose tracks
Shoe Width 26" shoe width
Grouser height 70-71mm
Track link wear See photos
Pins and Bushings Turned? No
Pins and bushing wear See photos
Carrier rollers wear See photos
Track rollers wear See photos
Front idler wear See photos
Sprockets See photos; Pointed; Worn
Limited Function Check (Undercarriage) Retaining straps over bearing covers loose/missing/damaged
Undercarriage #1
 
Specialty
Blade Condition 154 1/2" Blade width; Added metal plating. There is a gouge in the blade front.
Blade Cutting Edge Condition Reversible-Not turned
Ripper 1 shank; Hydraulic controlled pin connection
Specialty #1
Oil Sample Analysis Hydraulic engine
date of analysis Oct 28, 2009 Oct 28, 2009
Silicon 26 PPM 26 PPM
Lead 4 PPM 4 PPM
Tin 0 PPM 0 PPM
Copper 297 PPM 297 PPM
Aluminum 2 PPM 2 PPM
Silver 1.1 PPM 1.1 PPM
Nickel 0.7 PPM 0.7 PPM
Chromium 0.4 PPM 0.4 PPM
Iron 26 PPM 26 PPM
Glycol N/A 0
Water NEG 0
Fuel N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Arkansas, United States
  • Zip/Postal Code: 72209 (Little Rock-North Little Rock area)
  • The purchase of this item is subject to Arkansas sales tax unless certain conditions are met.
  • Hours: 8 - 4 Mon - Fri
  • Call at least one day in advance to schedule pickup.
  • NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...