• |
  • 888-433-5426
  • |
  • English
 Home Page / Construction / 2004 Caterpillar D3G XL Track Dozer
 

2004 Caterpillar D3G XL Track Dozer (#235136)

[Email to a Friend] [View all items in this Public Auction] 		Print Equipment Brochure  Print Equipment Brochure
Financing Available for this Item

SOLD!
Winning Bid: US $16,500  

• Sold on: 11/12/09
• # of Bids: 9
• Buyer From: Pennsylvania

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operator station w/heat, Mitsubishi 3046 engine w/Pre-Lube system, Hydrostatic drive, 16" track shoes, 94" blade
Meter Reading: 4,418 Hours
Serial Number: JMH00817
Location: Michigan, United States
Zip/Postal Code: 49548
(Grand Rapids-Muskegon-Holland area) 		 
  Request shipping quote or additional assistance with transportation
More Shipping Details 		 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
Protected by IronClad Assurance®
 
General Appearance
Serial Number / VIN jmh00817
CE Certification Label No
Paint Faded; Scratches; Chips
Sheet metal (fiberglass) condition Surface rust; Dented LR corner; Right side access door is bent; Grill fins are bent;
General Appearance #1
 
Control Station
Steps/Ladders Right front step bent
Hand Rails
Mirrors
Seats/Armrests Inoperable slide or adjustment; Seat cover coming loose in front.
Seat Belts Plastic cover worn; Receptacle is corroded and difficult to operate.
Horn Functional
Control Lock Lever
Disconnect Control
Hydraulic Controls Excessive play
Steering Controls See notes in Driveline section.
Powertrain Controls Stays in forward, has to be held in neutral and reverse; See notes in Driveline section.
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.; 40 PSI
Exterior Lights Functional Yes
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional; Oil temp gauge functionality unknown.
Hour Meter/Odometer Functional; 4418; Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Functional; The diffuser vents are broken/missing
Limited Function Check (cs) The components that were checked functioned except as noted.; Throttle lever/Hyd. control lever boots are torn.
Hour Meter/Odometer
 
Engine
Engine Make and Model Engine make: Mitsubishi; 3046 engine; Serial #: MHK03501
Fuel Type Diesel
Emission Control Label US EPA certification label
Block Heater No
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator Significant plugging of fins
Head Gasket Leaks Residue from unknown source
Oil Leaks Seepage: Side of engine
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check.; Has Pre-Lube system; Does not fully return to idle until de-accelerator is pushed and released; Engine mount bolt missing left side, bolt is in tray in operator station. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Travel Speeds Variable single
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track) The drivetrain was operational during a limited check without a load.; When first moving drivetrain would not fully engage until de-accelerator was pushed and released several times at operating RPM. Started operating normally after traveling approximately 100'; Pulls to left on straight travel.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Wet with residue
Hydraulic Tank
Hoses (Hydraulics) Chafed
Cylinders
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Roller Frames Some of the guards are bent/missing.
Belly pans Oil residue from unknown source.
Push arm/C-frame condition
Push Arm Trunnions Wear consistent with hours and age
Tilt/angle Linkage Pins and Bushings Wear consistent with hours and age
Blade Trunnions/bushings Loose; Shims remaining
Blade Lift Linkage Pins and Bushings Wear consistent with hours and age
Limited Function Check (dozer) The main dozer components functioned with wear.
Chassis #1
 
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes) 73 1/4" Overall width
Track Tensioners See photos; Tight track/tracks
Shoe Width 16" shoe width
Grouser height Left Side: 32 mm; Right Side: 32 mm
Track link wear See photos
Pins and Bushings Turned? No
Pins and bushing wear See photos; Heavy wear
Carrier rollers wear See photos
Track rollers wear See photos; Outer edge broken off right side roller.
Front idler wear See photos
Sprockets Pointed
Limited Function Check (Undercarriage) The components that could be checked functioned with wear as noted; Track pad bolt missing left side.
Undercarriage #1
 
Specialty
Blade Condition 94" Blade width; Dented left rear; Some cement residue on bottom.
Blade Cutting Edge Condition Reversible-Not turned; Bolts are loose on end plates.
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Nov 02, 2009 Nov 02, 2009
Silicon 9 PPM 10 PPM
Lead 0 PPM 2 PPM
Tin 1 PPM 2 PPM
Copper 1 PPM 23 PPM
Aluminum 0 PPM 2 PPM
Silver 0.1 PPM 0.2 PPM
Nickel 0.3 PPM 0.7 PPM
Chromium 0 PPM 0.3 PPM
Iron 9 PPM 10 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Michigan, United States
  • Zip/Postal Code: 49548 (Grand Rapids-Muskegon-Holland area)
  • The purchase of this item is subject to Michigan sales tax unless certain conditions are met.
  • Hours: LOADING HOURS: 8:30 am - 3:30 pm; Mon-Fri
  • Call at least one day in advance to schedule pickup.
  • Loading Dock Available.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...