• |
  • 888-433-5426
  • |
  • English
 Home Page / Search Results / 2005 Caterpillar 416D 4x4 Backhoe Loader
 

2005 Caterpillar 416D 4x4 Backhoe Loader (#235089)

[Email to a Friend] [View all items in this Public Auction]

SOLD!
Winning Bid: US $27,000  

 Sold on: 11/12/09
 # of Bids: 12
 Buyer From: Mississippi

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operator station, Cat 3054B engine, 4x4, floor shift w/shuttle lever, standard stick, 23" rear bucket, 88" loader bucket
Meter Reading: 2,077 Hours
Serial Number: BFP14445
Location: Alabama, United States
Zip/Postal Code: 35217
(Birmingham area)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN BFP14445
CE Certification Label No
Paint Faded; Scratches
Sheet metal (fiberglass) condition Minor dents, scrapes and surface rust in paint loss areas. The front rubber bumpers and radiator screen damaged.
Serial Number / VIN
 
Control Station
Hydraulic Controls
Backhoe Control Configuration Bucket and Stick on Right Boom and swing on left Outriggers on left console
Steps/Ladders Left Side: Bent; slight bend left side
Hand Rails Right Side: Bent
Mirrors
Glass
Seats/Armrests
Seat Belts
Horn Inoperable
Powertrain Controls
Steering Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer 2077.7; Functional; Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Indication of Additional Hours NA
Disconnect Control
Limited Function Check (cs) The components that were checked functioned except as noted.
Hour Meter/Odometer
 
Engine
Engine Make and Model Engine make: CAT; Serial #: CRS14119; 62KW ENG TYPE 2162
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None seen
Oil Leaks Oily dirt accumulation on timing gear cover
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Torque Converter Functional
Differential (front)
Differential (rear) Differential lock
Final Drives
Limited Function Check The drivetrain functioned during a limited check without a load. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics) Outer covering worn off on one hose
Cylinders Ram Chrome Damage; light chrome damage on both stabilizer and moderate chrome damage to bucket Cyl
Cylinder Pins and Bushings Minor wear; Wear consistent with hours and age
Limited Function Check The hydraulic system was operational during a limited check without a load.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Steering Wheel Play Minor
Brake Type Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Held against power
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4) 12.5/80-18 front tires; 19.5L-24 rear tires; Front: Right: Firestone; Front: Left: Deestone; Rear: Right: Firestone; Rear: Left: Firestone
Tire Condition Cuts
Tread Depth (4 tires) RF 18 mm; LF 16 mm; RR 18 mm; LR 24 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins Minor wear; Wear consistent with hours and age
Tilt Linkage Pins and Bushings Minor wear; Wear consistent with hours and age; All of bucket level indicator system is missing
Bucket to Arms Pins Minor wear; Wear consistent with hours and age
Limited Function Check (rt machines) The main components were operational with wear and / or damage as noted.
Boom Condition light dimpled
Stick Condition
Stick Type Standard stick
Boom Lock (Backhoe)
Boom Base Pin and Bushings Wear consistent with hours and age; Minor visible movement
Pin and Bushings Boom to Stick Wear consistent with hours and age
Pin and Bushings Stick to Bucket Wear consistent with hours and age; connector link bushings have some visible play
Outriggers Street pads
Stabilizer Cylinders Ram Chrome Damage
Limited Function Check (Backhoe) The main components were functional with minor to visible pivot point wear.
Chassis #1
 
Specialty
Backhoe / Excavator Bucket Condition 23" Rear bucket
Backhoe / Excavator Bucket Cutting Edge
Loader Bucket Cutting Edge Reversible-Not turned; moderate wear to cutting edge
Loader Bucket Condition 88" loader bucket; Worn; Dented; Right rear under corner worn through and pushed in
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Oct 23, 2009 Oct 23, 2009
Silicon 7 PPM 3 PPM
Lead 2 PPM 2 PPM
Tin 0 PPM 2 PPM
Copper 3 PPM 34 PPM
Aluminum 1 PPM 4 PPM
Silver 0 PPM 0.2 PPM
Nickel 0.9 PPM 0.1 PPM
Chromium 0.4 PPM 0.4 PPM
Iron 15 PPM 42 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Alabama, United States
  • Zip/Postal Code: 35217 (Birmingham area)
  • The purchase of this item is subject to Alabama sales tax unless certain conditions are met.
  • Hours: LOADING HOURS: 8:30 am - 3:30 pm; Mon-Fri
  • Call at least one day in advance to schedule pickup.
  • Loading Dock Available.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...