Minor dents/ scrapes; Surface rust in paint loss areas. Latch missing on rear panel.
General Appearance #1
Control Station
Steps/Ladders
Hand Rails
Mirrors
Missing
Seats/Armrests
Torn cover
Seat Belts
Dirty
Horn
Functional
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Engine Warning Lights
Functional
Travel Alarm
Functional
Gauges
Functional
Hour Meter/Odometer
Functional; 4,619 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Functional
Limited Function Check
The components that were checked functioned except as noted.
Hour Meter/Odometer
Engine
Make and Model
Engine make: Cat; 3116 engine; Serial #: 4TF67678
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Visible
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
The stack is bent and damaged. The tip is rusted.
Radiator
Minor plugging of fins
Head Gasket Leaks
None seen
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
After jump starting the engine ran with smoke that mostly cleared. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Full transmission shifting and functionality of all drive systems cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational during a limited check without a load. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Not visible
Valves
Hydraulic Tank
Hoses (Hydraulics)
Weathered
Cylinder(s)
Cylinder Pins and Bushings
Wear consistent with hours and age
Limited Function Check
The hydraulic system was operational during a limited check without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Roller Frames
Belly pans
Oil residue
Equalizer Bar Pivot Points
Normal wear
Limited Function Check (loader)
The main components were operational with wear.
Push arm/C-frame condition
Push Arm Trunnions
Wear consistent with hours and age
Tilt/angle Linkage Pins and Bushings
Wear consistent with hours and age
Blade Trunnions/bushings
The blade hangs low on the left side.
Blade Lift Linkage Pins and Bushings
Wear consistent with hours and age
Limited Function Check (dozer)
The main dozer components functioned with wear.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes)
119" Overall width
Track Tensioners
See photos
Shoe Width
34" shoe width
Grouser Height Measurement
29-30mm
Track link wear
See photos; Worn
Pins and Bushings Turned?
No
Pins and bushing wear
See photos; Worn
Carrier Rollers Wear
See photos
Track Rollers Wear
See photos
Front idler wear
See photos
Rear idler wear
See photos
Sprockets
See photos
Undercarriage #1
Specialty
Blade Condition
154" Blade width; The blade is dented along the side and top edges.
Blade Cutting Edge Condition
Reversible-Not turned
Other
Drawbar
Specialty #2
Oil Sample Analysis
Engine
Transmission
date of analysis
Oct 27, 2009
Oct 27, 2009
Silicon
2 PPM
7 PPM
Lead
0 PPM
4 PPM
Tin
1 PPM
2 PPM
Copper
0 PPM
47 PPM
Aluminum
1 PPM
2 PPM
Silver
0.1 PPM
0.3 PPM
Nickel
0.2 PPM
0.1 PPM
Chromium
0.3 PPM
0.2 PPM
Iron
4 PPM
36 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction.
The exact item location will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:00 am - 4:00 pm; Mon-Fri. Seller will assist with loading.
You must call at least 24 hours in advance to schedule pickup
Loading Dock Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before November 16.
This item is subject to 5% Virginia sales tax unless proof of exemption or declaration of Common Carrier shipment to another state is presented during item Checkout. (Read more)
Buyer must pay a transaction fee (see Buyer fees).
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee Penalty.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and forward to Bryan
Grittner or fax the application to (469) 519-4394.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Pinnacle Capital
Full Spectrum Financing for IronPlanet Auctions
IronPlanet has been offering financing for your purchases through a
partnership with Pinnacle Capital since 2002. Pinnacle knows what it takes to
get auction deals done fast and has facilitated several millions of dollars in
online purchases. Get a pre-approved line of credit set-up before you place a
bid to confirm your buying power. Click here to learn more about Pinnacle's financing products.
To qualify, complete Pinnacle's online
application. Once approved, they'll take care of the rest. Please contact
Matt Perini at 800-566-1993 or by
email to discuss the transaction further.
Powertrain Coverage. Covers major drive train components- engine, torque hubs, transmission & front
and rear axles - and more
Available in North America. May be purchased by residents of U.S. and Mexico only, for equipment operated
within U.S., Mexico or Canada.
OEM parts and service. All repairs are made by an OEM authorized repair facility with genuine OEM replacement
parts installed by OEM trained technicians.
888-433-5426
