• |
  • 888-433-5426
  • |
  • English
 Home Page / Construction / 1997 John Deere 310E Backhoe Loader
 

1997 John Deere 310E Backhoe Loader (#235010)

[Email to a Friend] [View all items in this Public Auction]

SOLD!
Winning Bid: US $17,000  

 Sold on: 11/12/09
 # of Bids: 15
 Buyer From: Pennsylvania

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Enclosed cab with heater, Deere 4045D engine, floor shift w/shuttle lever, 4x4, E-stick, 23" rear bucket, 84" loader bucket
Meter Reading: 4,281 Hours
Serial Number: T0310EX827336
Location: New Jersey, United States
Zip/Postal Code: 08501
(Monmouth County)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN T0310EX827336
CE Certification Label No
Paint Faded; scratches; chips
Sheet metal (fiberglass) condition Minor dents; scrapes; rust in paint loss areas
Serial Number / VIN
 
Control Station
Steps/Ladders
Hand Rails
Mirrors
Glass Some missing; plexiglass and wood replacement; missing/damaged weather stripping; gaps filled with sealant
Seats/Armrests Missing armrest; inoperable spin lock; dirty
Seat Belts
Horn Functional
Powertrain Controls Loose boots; missing button cover
Disconnect Control Inoperable shifter disconnect
Hydraulic Controls Loose; worn; return to dig inoperable
Steering Controls
Oil Pressure The fault indicator shuts off after engine oil pressure rises
Exterior Lights Functional Some inoperable; cracked lenses
Engine Warning Lights Functional; difficult to read; hydraulic light stays on
Travel Alarm Inoperable
Gauges Functional
Hour Meter/Odometer Functional; 4,281 hours; The seller stated that hour meter has turned; add 9,999 to hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Functional; dust blows from vents; damaged vents
Limited Function Check (cs) The main components were functional with wear and damage during a limited check. The floor mat is damaged.
Hour Meter/Odometer
 
Engine
Engine Make and Model Deere 4045D
Fuel Type Diesel
Emission Control Label Unreadable
Block Heater Yes; not functionally checked
Blow by @ idle (subjective observation) Visible
Starter
Injector Pump Operational; leaks; residue
Exhaust System
Radiator Damaged fins; bent grille; residue
Head Gasket Leaks None seen
Oil Leaks None seen; wet residue; dented oil pan
Fuel Leaks Seepage; residue
Cooling System Leaks None seen; inspector noted over one gallon of coolant was added
Limited Function Check After jump starting the engine ran with leaks and damage during a limited check. The inspector noted the engine was slow to reach operating RPM's when under a load. There is insulation coming loose from wires in the engine compartment. See oil report.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Wet residue
Torque Converter Functional; residue
Differential (front) Wet residue on inner hubs
Differential (rear) Seepage; residue
Limited Function Check The drivetrain was functional with leaks during a limited low speed check. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Residue
Valves Residue
Hydraulic Tank Cloudy sight glass
Hoses (Hydraulics) Leaks; residue; worn; chafed; cracked; steel braid exposed; loose
Cylinders Seepage; residue; rod chrome damage; loose head gland
Cylinder Pins and Bushings Worn; bent retainer
Limited Function Check The hydraulic system was functional with wear, damage, and leaks during a limited check without a load.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Visible movement; damaged bushings; missing seals; damaged boots; heat marks
Steering Wheel Play Visible slack
Brake Type Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4) (F) 12-16.5; (R)19.5-24
Tire Condition Cuts; plugs; gouges; low air
Tread Depth (4 tires) (RF) 3mm; (LF) 11mm; (RR) 13mm; (LR) 12mm
Wheel Condition Rusty, dents
Wheel Studs, Nuts, Lugs
Lift Arm Condition Dented; scrapes
Chassis to Arm Pins
Tilt Linkage Pins and Bushings Visible movement
Bucket to Arms Pins Visible movement
Boom Condition Dented; scratched
Stick Condition Scratched
Stick Type Extendable
Extendahoe Stick Guide Visible slack
Boom Lock (Backhoe) Inoperable
Boom Base Pin and Bushings Heavy wear
Pin and Bushings Boom to Stick Heavy wear
Pin and Bushings Stick to Bucket Heavy wear
Outriggers Street pads; worn
Stabilizer Cylinders Seepage; residue; rod chrome damage; heavy wear; cracked bushing
Limited Function Check (Backhoe) The main components were functional with wear, leaks, and damage during a limited check.
Chassis #1
 
Specialty
Backhoe / Excavator Bucket Condition 23"; heavy wear; dented; cracked
Backhoe / Excavator Bucket Cutting Edge Missing teeth; worn shanks; scalloped edge
Loader Bucket Cutting Edge Reversible; not turned; worn
Loader Bucket Condition 84"; worn; dented; welded repair; caked with material; hook welded to top
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Oct 22, 2009 Oct 22, 2009
Silicon 5 PPM 9 PPM
Lead 2 PPM 18 PPM
Tin 1 PPM 0 PPM
Copper 6 PPM 302 PPM
Aluminum 1 PPM 3 PPM
Silver 0 PPM 1.9 PPM
Nickel 0.7 PPM 0.3 PPM
Chromium 0.8 PPM 0.4 PPM
Iron 18 PPM 50 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: New Jersey, United States
  • Zip/Postal Code: 08501 (Monmouth County)
  • The purchase of this item is subject to New Jersey sales tax unless certain conditions are met.
  • Hours: Any Time; Seller will assist with loading.
  • Call at least one day in advance to schedule pickup.
  • NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...