2006 Caterpillar 242B Skid-Steer Loader (IronPlanet Item #234804)

SOLD!

Winning Bid: US $13,000

• Sold on: 11/5/09
• # of Bids: 15 View Bid History
• Buyer From: Idaho

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here

Features:	Open operator station, Cat 3024C engine, 10-16.5 tires, high flow auxiliary hydraulics, 62" loader bucket, manual coupler

Meter Reading:	See Report
Serial Number:	BXM02923
Location:	Washington, United States Zip/Postal Code: 99301 (Richland-Kennewick-Pasco area)
	Request shipping quote or additional assistance with transportation More Shipping Details
You may also be interested in these other items.

Inspection Report

Inspection Ratings Key
	New or recently replaced
	Performs within the tolerances expected for age and type of equipment
	Although performing, shows indication of needing repair or replacement
	Needs immediate repair/replacement. Requires work if it is to perform as expected

Protected by IronClad Assurance®

General Appearance

Serial Number / VIN		BXM02923
CE Certification Label		No
Paint		Scratches; Chips
Sheet metal (fiberglass) condition		Minor dents/ scrapes; Surface rust in paint loss areas

Serial Number / VIN

Control Station

Steps/Ladders
Hand Rails
Mirrors
Glass		Rear only
Seats/Armrests
Seat Belts
Horn		Functional
Control Lock Lever
Disconnect Control
Hydraulic Controls
Steering Controls
Powertrain Controls
Oil Pressure		The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional		Yes
Engine Warning Lights		Functional; The battery light stays on.
Travel Alarm		Functional
Gauges		Functional
Hour Meter/Odometer		Inoperable; 914 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Indication of Additional Hours		Hourmeter inoperable; The oil filters read "851 hours on 4/17/08)
Limited Function Check (cs)		The components that were checked functioned except as noted.

Hour Meter/Odometer

Engine

Engine Make and Model		Engine make: Cat; 3024C engine
Fuel Type		Diesel
Emission Control Label		US EPA certification label
Blow by @ idle (subjective observation)		Significant
Starter
Turbo or Blower		Operational
Injector Pump		Operational
Exhaust System
Radiator
Head Gasket Leaks		None seen
Oil Leaks		Residue at the side and bottom of the engine
Fuel Leaks		None seen
Cooling System Leaks		None seen
Limited Function Check		After jump starting the engine ran. See oil report.

Emission Control Label

Drivetrain

Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Limited Function Check		The drivetrain functioned during a limited low speed check without a load.

Chassis

IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Tire Size		10-16.5 tires; Brand name(s) Anvil
Tire Condition		Cuts; Gouges
Tire Depth		RF 11 mm; LF 0 mm; RR 9 mm; LR 0 mm
Wheel Condition
Wheel Studs
Lift Arm Condition
Chassis to Arm Pins
Quick Coupler to Arms Pins		Dry
Limited Function Check (rt machines)		The main chassis components functioned during a limited check.

Chassis #1

Hydraulics

Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing		Yes; Not operationally checked; The electrical connector is bent.
Cylinders
Cylinder Pins and Bushings
Limited Function Check		The hydraulic system was operational during a limited check without a load. See oil report.

Hydraulics #1

Specialty

Loader Bucket Condition		62" General purpose loader bucket
Loader Bucket Cutting Edge		Worn; Scalloped edge between teeth
Quick Coupler		Manual coupler; Functional

Specialty #1

Oil Sample Analysis	Engine	Hydraulic
date of analysis	Oct 21, 2009	Oct 21, 2009
Silicon	125 PPM	2 PPM
Lead	0 PPM	4 PPM
Tin	2 PPM	0 PPM
Copper	2 PPM	8 PPM
Aluminum	43 PPM	2 PPM
Silver	0 PPM	0.4 PPM
Nickel	0.3 PPM	0.1 PPM
Chromium	4.9 PPM	0.2 PPM
Iron	60 PPM	13 PPM
Glycol	NEG	N/A
Water	NEG	NEG
Fuel	<5%	N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details

Request shipping quote or additional assistance with transportation

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

Location: Washington, United States
Zip/Postal Code: 99301 (Richland-Kennewick-Pasco area)
The purchase of this item is subject to Washington sales tax unless certain conditions are met.
Hours: LOADING HOURS: 8:30 am - 3:30 pm; Mon-Fri.
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...

2006 Caterpillar 242B Skid-Steer Loader (#234804)