• |
  • 888-433-5426
  • |
  • English
 Home Page / 2006 Caterpillar 242B Skid-Steer Loader
 

2006 Caterpillar 242B Skid-Steer Loader (#234804)


SOLD!
Winning Bid: US $13,000  

 Sold on: 11/5/09
 # of Bids: 15   View Bid History
 Buyer From: Idaho

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operator station, Cat 3024C engine, 10-16.5 tires, high flow auxiliary hydraulics, 62" loader bucket, manual coupler
Meter Reading: See Report
Serial Number:
Location: Washington, United States
Zip/Postal Code: 99301
(Richland-Kennewick-Pasco area)
 
You may also be interested in these other items.
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark No
Paint Scratches; Chips
Sheet Metal (fiberglass) Condition Minor dents/ scrapes; Surface rust in paint loss areas
General Appearance #1
 
Control Station
Steps/Ladders
Hand Rails
Mirrors
Glass Rear only
Seats/Armrests
Seat Belts
Horn Functional
Control Lock Lever
Transmission Disconnect Control
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Engine Warning Lights Functional; The battery light stays on.
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer Inoperable; 914 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The components that were checked functioned except as noted.
Hour Meter/Odometer
 
Engine
Make and Model Engine make: Cat; 3024C engine
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Significant
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None seen
Oil Leaks Residue at the side and bottom of the engine
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check After jump starting the engine ran. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Full transmission shifting and functionality of all drive systems cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Limited Function Check The drivetrain functioned during a limited low speed check without a load.
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Tire Size 10-16.5 tires; Brand name(s) Anvil
Tire Condition Cuts; Gouges
Tire Depth RF 11 mm; LF 0 mm; RR 9 mm; LR 0 mm
Wheel Condition
Wheel Studs
Lift Arm Condition
Chassis to Arm Pins
Quick Coupler to Arms Pins Dry
Limited Function Check The main chassis components functioned during a limited check.
Chassis #1
 
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing Yes; Not operationally checked; The electrical connector is bent.
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
 
Specialty
Loader Bucket Condition 62" General purpose loader bucket
Loader Bucket Cutting Edge Worn; Scalloped edge between teeth
Quick Coupler Manual coupler; Functional
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Oct 21, 2009 Oct 21, 2009
Silicon 125 PPM 2 PPM
Lead 0 PPM 4 PPM
Tin 2 PPM 0 PPM
Copper 2 PPM 8 PPM
Aluminum 43 PPM 2 PPM
Silver 0 PPM 0.4 PPM
Nickel 0.3 PPM 0.1 PPM
Chromium 4.9 PPM 0.2 PPM
Iron 60 PPM 13 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.

We Suggest You Also See...  
Extended Service Plan available
Powertrain Coverage.  Covers major drive train components- engine, torque hubs, transmission & front and rear axles - and more

Available in North America.  May be purchased by residents of U.S. and Mexico only, for equipment operated within U.S., Mexico or Canada.

OEM parts and service.  All repairs are made by an OEM authorized repair facility with genuine OEM replacement parts installed by OEM trained technicians.

Affordable plans.

Learn More