• |
  • 888-433-5426
  • |
  • English
 Home Page / Make="Aggreko" / 2005 Caterpillar 236B Skid-Steer Loader
 

2005 Caterpillar 236B Skid-Steer Loader (#234497)

[Email to a Friend] [View all items in this Public Auction] 		Print Equipment Brochure  Print Equipment Brochure
Financing Available for this Item

SOLD!
Winning Bid: US $14,000  

• Sold on: 11/5/09
• # of Bids: 31   View Bid History
• Buyer From: Venezuela

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operator station, Mitsubishi 3044C-T engine, auxiliary hydraulic plumbing, 73.5" bucket, manual coupler, 12-16.5NHS tires
Meter Reading: 2,232 Hours
Serial Number: HEN02036
Location: Georgia, United States
Zip/Postal Code: 30817
(Lincoln County) 		 
  Request shipping quote or additional assistance with transportation
More Shipping Details 		 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
Protected by IronClad Assurance®
 
General Appearance
Serial Number / VIN HEN02036
CE Certification Label No
Paint New paint in some areas
Sheet metal (fiberglass) condition Dents; scrapes
Serial Number / VIN
 
Control Station
Steps/Ladders
Hand Rails
Mirrors
Glass
Seats/Armrests
Seat Belts
Horn Functional
Control Lock Lever
Disconnect Control
Hydraulic Controls Damaged boots
Steering Controls
Powertrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes; missing bottom rear
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer Functional; 2,232 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs) The components that were checked functioned except as noted. The roof of control station is bent.
Hour Meter/Odometer
 
Engine
Engine Make and Model Mitsubishi 3044C-T
Fuel Type Diesel
Emission Control Label US EPA certification label
Block Heater No
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None seen
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Limited Function Check The drivetrain functioned during a limited low speed check without a load.
Drivetrain #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Tire Size 12-16.5NHS; Caterpillar
Tire Condition
Tire Depth 19 mm
Wheel Condition
Wheel Studs
Lift Arm Condition
Chassis to Arm Pins Wear consistent with hours and age
Tilt Linkage Pins and Bushings Wear consistent with hours and age
Quick Coupler to Arms Pins Wear consistent with hours and age
Limited Function Check (rt machines) The main chassis components functioned during a limited check with wear as noted.
Chassis #1
 
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing Yes; not functionally checked
Cylinders
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system was operational during a limited check without a load with wear as noted.
Hydraulics #1
 
Specialty
Loader Bucket Condition 73.5"
Loader Bucket Cutting Edge
Quick Coupler Manual coupler
Specialty #1
Oil Sample Analysis Engine
date of analysis Oct 28, 2009
Silicon 2 PPM
Lead 2 PPM
Tin 2 PPM
Copper 4 PPM
Aluminum 3 PPM
Silver 0 PPM
Nickel 0.1 PPM
Chromium 0.1 PPM
Iron 8 PPM
Glycol NEG
Water NEG
Fuel <5%

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Georgia, United States
  • Zip/Postal Code: 30817 (Lincoln County)
  • The purchase of this item is subject to Georgia sales tax unless certain conditions are met.
  • Hours: Mon - Fri 8 to 4
  • Call at least one day in advance to schedule pickup.
  • NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
  • Call 24 hours in advance of pick-up

We Suggest You Also See...