The fault indicator shuts off after engine oil pressure rises
Exterior Lights Functional
Yes
Engine Warning Lights
Functional
Travel Alarm
Functional
Gauges
Functional; blank holes in panel; missing hardware
Hour Meter/Odometer
Functional; 8,833 hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)
The components that were checked functioned except as noted.
Hour Meter/Odometer
Engine
Engine Make and Model
Cat 3126
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Block Heater
No
Blow by @ idle (subjective observation)
Minimal
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
Radiator
Head Gasket Leaks
None seen
Oil Leaks
Seepage; residue
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran with leaks during a limited check. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Heat marks; residue
Torque Converter
Functional
Differential (front)
Differential (rear)
Wet residue
Final Drives
Limited Function Check
The drivetrain functioned during a limited check without a load. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Worn; weathered
Cylinders
Cylinder Pins and Bushings
Worn
Limited Function Check
The hydraulic system was operational with wear during a limited check without a load.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Articulating Center Pins
Worn
Steering Wheel Play
Minimal
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Functional
Limited Function Check (Brakes)
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4)
23.5R-25
Tire Condition
Cuts
Tread Depth (4 tires)
(RF) 18mm; (LF) 14mm; (RR) 16mm; (LR) 12mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins
Tilt Linkage Pins and Bushings
Quick Coupler to Arms Pins
Worn
Limited Function Check (rt machines)
The main chassis components functioned with wear during a limited check.
Chassis #1
Specialty
Loader Bucket Condition
114"; worn; welded repairs; worn skid plates
Loader Bucket Cutting Edge
Reversible; turned; worn
Quick Coupler
Functional; hydraulic
Drawbar
Missing pin
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Oct 26, 2009
Oct 26, 2009
Silicon
6 PPM
3 PPM
Lead
0 PPM
2 PPM
Tin
1 PPM
0 PPM
Copper
2 PPM
8 PPM
Aluminum
2 PPM
1 PPM
Silver
0 PPM
0 PPM
Nickel
0.3 PPM
0.5 PPM
Chromium
0.3 PPM
0 PPM
Iron
3 PPM
20 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
Location: California, United States
Zip/Postal Code: 92111
(San Diego area)
The purchase of this item is subject to California sales tax unless certain conditions are met.
Hours: 8am to 5pm Mon-Fri
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
888-433-5426
