The paint is faded with scratches and chips. There are areas of paint peeling.
Sheet metal (fiberglass) condition
The sheet metal is dented and scraped with rust in the paint loss areas.
Serial Number / VIN
Control Station
Hydraulic Controls
Backhoe Control Configuration
4-lever with foot swing style
Steps/Ladders
The left side steps are weld repaired.
Hand Rails
Mirrors
Glass
Broken
Seats/Armrests
Seat Belts
Inoperable
Horn
Inoperable
Powertrain Controls
Steering Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional
Yes
Engine Warning Lights
Functional
Travel Alarm
Functional
Gauges
Functional
Hour Meter/Odometer
Functional; 63 hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Indication of Additional Hours
2411-HR is written under the hour meter.
Limited Function Check (cs)
The components that were checked functioned except as noted.
Hour Meter/Odometer
Engine
Engine Make and Model
Cat 3054 engine; Serial #: 5HK82798
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Block Heater
No
Blow by @ idle (subjective observation)
Minimal
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
Radiator
Head Gasket Leaks
None seen
Oil Leaks
There is seepage from the valve cover, the side of the engine, and the oil pan.
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran during a limited check. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Torque Converter
Feels normal
Differential (front)
There is oil residue on the yolk.
Differential (rear)
Final Drives
Limited Function Check
The drivetrain functioned during a limited check without a load. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cylinders
Ram Chrome Damage
Cylinder Pins and Bushings
Wear consistent with hours and age
Limited Function Check
The hydraulic system was operational during a limited check without a load.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Wear consistent with hours and age
Steering Wheel Play
Minor
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Held on slope
Limited Function Check (Brakes)
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4)
12.5/80-18 front tires; 19.5L-24 rear tires; Brands: Deestone, West Lake
Tire Condition
Cuts
Tread Depth (4 tires)
RF 13 mm; LF 6 mm; RR 17 mm; LR 18 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Weld repair
Chassis to Arm Pins
Wear consistent with hours and age
Tilt Linkage Pins and Bushings
Wear consistent with hours and age
Bucket to Arms Pins
Wear consistent with hours and age
Boom Condition
Weld repair; Plated
Stick Condition
Stick Type
Extendable stick
Extendahoe Stick Guide
Minor wear
Boom Lock (Backhoe)
Boom Base Pin and Bushings
Wear consistent with hours and age
Pin and Bushings Boom to Stick
Wear consistent with hours and age
Pin and Bushings Stick to Bucket
Wear consistent with hours and age
Outriggers
Street pads
Stabilizer Cylinders
Ram Chrome Damage
Limited Function Check (Backhoe)
The main components were functional with minor to visible pivot point wear.
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
Location: California, United States
Zip/Postal Code: 92020
(San Diego area)
The purchase of this item is subject to California sales tax unless certain conditions are met.
Hours: 8am to 5pm Mon-Fri
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
888-433-5426
