• |
  • 888-433-5426
  • |
  • English
 Home Page / 1999 Caterpillar 416C 4x4 Backhoe Loader
 

1999 Caterpillar 416C 4x4 Backhoe Loader (#234369)

View other Daily Marketplace items

SOLD!
Winning Bid: US $16,000  
Won using: Win It Now

 Sold on: 11/6/09
 # of Bids: 1   View Bid History
 Buyer From: California

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operator station, Cat 3054 engine, floor shift w/shuttle lever, 4x4, 18" raer bucket, 90" loader bucket
Meter Reading: See Report
Serial Number:
Location: California, United States  
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark No
Paint The paint is faded with scratches and chips. There are areas of paint peeling.
Sheet Metal (fiberglass) Condition The sheet metal is dented and scraped with rust in the paint loss areas.
General Appearance #1
 
Control Station
Hydraulic Controls
Backhoe Control Configuration 4-lever with foot swing style
Steps/Ladders The left side steps are weld repaired.
Hand Rails
Mirrors
Glass Broken
Seats/Armrests
Seat Belts Inoperable
Horn Inoperable
Drivetrain Controls
Steering Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer Functional; 63 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The components that were checked functioned except as noted.
Hour Meter/Odometer
 
Engine
Make and Model Cat 3054 engine; Serial #: 5HK82798
Fuel Type Diesel
Emission Control Label US EPA certification label
Block Heater No
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None seen
Oil Leaks There is seepage from the valve cover, the side of the engine, and the oil pan.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Torque Converter Feels normal
Front Drive Axle There is oil residue on the yolk.
Rear Drive Axle
Final Drives
Limited Function Check The drivetrain functioned during a limited check without a load. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cylinder(s) Ram Chrome Damage
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system was operational during a limited check without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Wear consistent with hours and age
Steering Wheel Play Minor
Brake Type Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake Held on slope
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size 12.5/80-18 front tires; 19.5L-24 rear tires; Brands: Deestone, West Lake
Tire Condition Cuts
Tread Depth (4 tires) RF 13 mm; LF 6 mm; RR 17 mm; LR 18 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition Weld repair
Chassis to Arm Pins Wear consistent with hours and age
Tilt Linkage Pins and Bushings Wear consistent with hours and age
Bucket to Arm Pins Wear consistent with hours and age
Boom Condition Weld repair; Plated
Stick Condition
Stick Type Extendable stick
Stick Extension Wear Guides Minor wear
Boom Lock (Backhoe)
Boom Base Pin and Bushings Wear consistent with hours and age
Pin and Bushings Boom to Stick Wear consistent with hours and age
Pin and Bushings Stick to Bucket Wear consistent with hours and age
Outriggers Street pads
Outrigger Cylinders Ram Chrome Damage
Limited Function Check (Backhoe) The main components were functional with minor to visible pivot point wear.
Chassis #1
 
Specialty
Backhoe / Excavator Bucket Condition Width: 18"; Weld repaired; Dented; Worn
Backhoe / Excavator Bucket Shanks and Teeth
Loader Bucket Cutting Edge Reversible-turned
Loader Bucket Condition 90" Multi-purpose loader bucket; Weld repaired; Dented
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Oct 26, 2009 Oct 26, 2009
Silicon 10 PPM 1 PPM
Lead 1 PPM 3 PPM
Tin 2 PPM 0 PPM
Copper 8 PPM 7 PPM
Aluminum 1 PPM 0 PPM
Silver 0 PPM 0 PPM
Nickel 0.4 PPM 0.2 PPM
Chromium 0.3 PPM 0.1 PPM
Iron 12 PPM 19 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
Extended Service Plan available
Powertrain Coverage.  Covers major drive train components- engine, torque hubs, transmission & front and rear axles - and more

Available in North America.  May be purchased by residents of U.S. and Mexico only, for equipment operated within U.S., Mexico or Canada.

OEM parts and service.  All repairs are made by an OEM authorized repair facility with genuine OEM replacement parts installed by OEM trained technicians.

Affordable plans.

Learn More