• |
  • 888-433-5426
  • |
  • English
 Home Page / 2002 Caterpillar 950G Wheel Loader
 

2002 Caterpillar 950G Wheel Loader (#234366)

View other Daily Marketplace items

SOLD!
Winning Bid: US $43,000  

 Sold on: 12/9/09
 # of Bids: 20   View Bid History
 Buyer From: Mexico

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operator station, Cat 3126 engine, powershift trans, 23.5R-25 tires, 114" bucket, hydraulic coupler
Meter Reading: 9,866 Hours
Serial Number:
Location: California, United States  
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark No
Paint Faded; scratches; chips
Sheet Metal (fiberglass) Condition Dents; scrapes; gouged; hole; bent grille; missing front fenders; rust in paint loss areas
General Appearance #1
 
Control Station
Steps/Ladders Bent
Hand Rails
Mirrors
Seats/Armrests Missing headrest; torn; dirty
Seat Belts
Horn Functional
Control Lock Lever
Transmission Disconnect Control
Hydraulic Controls
Steering Controls Loose panel
Drivetrain Controls Damaged pedal
Oil Pressure The fault indicator shuts off after engine oil pressure rises
Exterior Lights Operational Yes; some inoperable
Engine Warning Lights Functional; loose panel
Travel Alarm Functional
Gauges Functional; missing knob; damaged switch
Hour Meter/Odometer Functional; 9,866 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The components that were checked functioned except as noted.
Hour Meter/Odometer
 
Engine
Make and Model Cat 3126
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator Minor plugging of fins; residue
Head Gasket Leaks None seen
Oil Leaks Seepage; residue buildup
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran with leaks during a limited check. The alternator belt is cracked. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Heat marks
Torque Converter Functional
Front Drive Axle
Rear Drive Axle Material buildup
Final Drives
Limited Function Check The drivetrain functioned during a limited check without a load. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Wet residue
Hydraulic Tank
Hoses (Hydraulics) Residue; worn; weathered
Cylinder(s)
Cylinder Pins and Bushings Worn; wet residue
Limited Function Check The hydraulic system was operational with wear during a limited check without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Articulating Center Pins Worn
Steering Wheel Play Minimal
Brake Type Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake Functional
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition Bent brackets
Tire Size 23.5R-25
Tire Condition Cuts
Tread Depth (4 tires) (RF) 22mm; (LF) 22mm; (RR) 25mm; (LR) 25mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins
Tilt Linkage Pins and Bushings
Quick Coupler to Arms Pins Worn
Limited Function Check The main chassis components functioned with wear and damage during a limited check.
Chassis #1
 
Specialty
Loader Bucket Condition 114" bucket; worn; welded repairs; damaged skid plate; caked with debris hard to visually inspect
Loader Bucket Cutting Edge Reversible; not turned; worn
Quick Coupler Functional; hydraulic
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Oct 28, 2009 Oct 28, 2009
Silicon 1 PPM 2 PPM
Lead 2 PPM 1 PPM
Tin 2 PPM 0 PPM
Copper 7 PPM 3 PPM
Aluminum 3 PPM 0 PPM
Silver 0.1 PPM 0 PPM
Nickel 0.2 PPM 0 PPM
Chromium 0.2 PPM 0 PPM
Iron 12 PPM 10 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
Extended Service Plan available
Powertrain Coverage.  Covers major drive train components- engine, torque hubs, transmission & front and rear axles - and more

Available in North America.  May be purchased by residents of U.S. and Mexico only, for equipment operated within U.S., Mexico or Canada.

OEM parts and service.  All repairs are made by an OEM authorized repair facility with genuine OEM replacement parts installed by OEM trained technicians.

Affordable plans.

Learn More