Dents; scrapes; gouged; hole; bent grille; missing front fenders; rust in paint loss areas
Serial Number / VIN
Control Station
Steps/Ladders
Bent
Hand Rails
Mirrors
Seats/Armrests
Missing headrest; torn; dirty
Seat Belts
Horn
Functional
Control Lock Lever
Disconnect Control
Hydraulic Controls
Steering Controls
Loose panel
Powertrain Controls
Damaged pedal
Oil Pressure
The fault indicator shuts off after engine oil pressure rises
Exterior Lights Functional
Yes; some inoperable
Engine Warning Lights
Functional; loose panel
Travel Alarm
Functional
Gauges
Functional; missing knob; damaged switch
Hour Meter/Odometer
Functional; 9,866 hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)
The components that were checked functioned except as noted.
Hour Meter/Odometer
Engine
Engine Make and Model
Cat 3126
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minimal
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
Radiator
Minor plugging of fins; residue
Head Gasket Leaks
None seen
Oil Leaks
Seepage; residue buildup
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran with leaks during a limited check. The alternator belt is cracked. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Heat marks
Torque Converter
Functional
Differential (front)
Differential (rear)
Material buildup
Final Drives
Limited Function Check
The drivetrain functioned during a limited check without a load. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Wet residue
Hydraulic Tank
Hoses (Hydraulics)
Residue; worn; weathered
Cylinders
Cylinder Pins and Bushings
Worn; wet residue
Limited Function Check
The hydraulic system was operational with wear during a limited check without a load.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Articulating Center Pins
Worn
Steering Wheel Play
Minimal
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Functional
Limited Function Check (Brakes)
The brake system functioned, stopping and holding the machine.
Frame Condition
Bent brackets
Tire Size (4)
23.5R-25
Tire Condition
Cuts
Tread Depth (4 tires)
(RF) 22mm; (LF) 22mm; (RR) 25mm; (LR) 25mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins
Tilt Linkage Pins and Bushings
Quick Coupler to Arms Pins
Worn
Limited Function Check (rt machines)
The main chassis components functioned with wear and damage during a limited check.
Chassis #1
Specialty
Loader Bucket Condition
114" bucket; worn; welded repairs; damaged skid plate; caked with debris hard to visually inspect
Loader Bucket Cutting Edge
Reversible; not turned; worn
Quick Coupler
Functional; hydraulic
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Oct 28, 2009
Oct 28, 2009
Silicon
1 PPM
2 PPM
Lead
2 PPM
1 PPM
Tin
2 PPM
0 PPM
Copper
7 PPM
3 PPM
Aluminum
3 PPM
0 PPM
Silver
0.1 PPM
0 PPM
Nickel
0.2 PPM
0 PPM
Chromium
0.2 PPM
0 PPM
Iron
12 PPM
10 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
Location: California, United States
Zip/Postal Code: 92592
(Riverside County)
The purchase of this item is subject to California sales tax unless certain conditions are met.
Hours: 8am to 5pm Mon-Fri
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
888-433-5426
