• |
  • 888-433-5426
  • |
  • English
 Home Page / Location="CAN" / 2003 Caterpillar 420D 4x4 Backhoe Loader
 

2003 Caterpillar 420D 4x4 Backhoe Loader (#234259)

[Email to a Friend] [View all items in this Public Auction]

SOLD!
Winning Bid: US $25,500  

 Sold on: 11/12/09
 # of Bids: 27
 Buyer From: Florida

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operators station, Cat 3054 engine, floor shift w/shuttle lever, 4x4, 48" forks w/hydraulic coupler, 23" rear bucket
Meter Reading: 1,807 Hours
Serial Number: BLN06248
Location: Florida, United States
Zip/Postal Code: 32234
(Jacksonville area)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN BLN06248
CE Certification Label No
Paint Faded; scratches; chips
Sheet metal (fiberglass) condition Minor dents: scrapes; rust in paint loss areas; damaged left fender
Serial Number / VIN
 
Control Station
Hydraulic Controls
Backhoe Control Configuration Cat style
Steps/Ladders
Hand Rails
Mirrors
Glass
Seats/Armrests Torn
Seat Belts
Horn Functional
Powertrain Controls
Steering Controls Damaged steering wheel
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer Functional; 1,807 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Disconnect Control
Limited Function Check (cs) The components that were checked functioned except as noted during a limited check.
Hour Meter/Odometer
 
Engine
Engine Make and Model CAT 3054; serial# 7BJ23671
Fuel Type Diesel
Emission Control Label US EPA certification label
Block Heater No
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational; rusty
Exhaust System
Radiator Loose moulding
Head Gasket Leaks None seen; residue
Oil Leaks None seen; wet residue
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran with leaks as noted during a limited check. There is cut wiring at rear of alternator. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Torque Converter Functional
Differential (front)
Differential (rear) Residue; differential lock inoperable
Final Drives
Limited Function Check The drivetrain functioned during a limited check without a load except as noted. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Residue
Hydraulic Tank
Hoses (Hydraulics) Worn; cuts; steel braid exposed
Cylinders
Cylinder Pins and Bushings Grease residue
Limited Function Check The hydraulic system was operational during a limited check without a load with wear as noted. See oil report.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Steering Wheel Play Minimal
Brake Type Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Functional
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4) (F) 12.5/80-18; (R) 19.5L-24
Tire Condition Cuts; gouges
Tread Depth (4 tires) (RF) 20mm; (LF) 8mm; (RR) 12mm; (LR) 11mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins Residue
Tilt Linkage Pins and Bushings
Quick Coupler to Arms Pins Movement
Limited Function Check (rt machines) The main chassis components functioned with leaks and wear during a limited check.
Boom Condition
Stick Condition Scratches; heat marks
Stick Type Standard stick
Boom Lock (Backhoe)
Boom Base Pin and Bushings Worn; residue
Pin and Bushings Boom to Stick
Pin and Bushings Stick to Bucket Worn; residue
Outriggers Street pads
Stabilizer Cylinders
Limited Function Check (Backhoe) The main components were functional with wear as noted during a limited check.
Chassis #1
 
Specialty
Backhoe / Excavator Bucket Condition 23"; worn; dents; welded repairs
Quick Coupler Hydraulic coupler; functional
Forks 48"; worn
Specialty #1
Oil Sample Analysis Engine Transmission Hydraulic
date of analysis Oct 19, 2009 Oct 19, 2009 Oct 19, 2009
Silicon 2 PPM 5 PPM 13 PPM
Lead 0 PPM 0 PPM 1 PPM
Tin 0 PPM 0 PPM 0 PPM
Copper 4 PPM 12 PPM 22 PPM
Aluminum 0 PPM 3 PPM 6 PPM
Silver 0 PPM 0.1 PPM 1.3 PPM
Nickel 0.2 PPM 0.2 PPM 0.2 PPM
Chromium 0.1 PPM 0.3 PPM 0.6 PPM
Iron 6 PPM 23 PPM 17 PPM
Glycol NEG N/A N/A
Water NEG NEG NEG
Fuel <5% N/A N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Florida, United States
  • Zip/Postal Code: 32234 (Jacksonville area)
  • The purchase of this item is subject to Florida sales tax unless certain conditions are met.
  • Hours: M-F 9:00 AM - 4:00 PM
  • Call at least one day in advance to schedule pickup.
  • NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
  • Call 24 hours in advance of pick-up

We Suggest You Also See...