Fault indicator shuts off after engine oil pressure rises
Exterior Lights Functional
Yes; some inoperable
Engine Warning Lights
Functional
Travel Alarm
Functional
Gauges
Functional
Hour Meter/Odometer
Functional; 1,824 hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Ambient temperature too cold to check; compressor hose covering torn
Heater
Functional; operates at all speeds
Disconnect Control
Functional
Limited Function Check (cs)
The main components functioned with wear and damage during a limited check. The control station is dirty.
Hour Meter/Odometer
Engine
Engine Make and Model
Perkins 1104C
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
Rusty
Radiator
Bent fins and minor plugging
Head Gasket Leaks
None seen
Oil Leaks
None seen; residue
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran during a limited check. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Low oil level; wet residue
Torque Converter
Functional
Differential (front)
Residue
Differential (rear)
Wet residue
Limited Function Check
The drivetrain was functional during a limited low speed check without a load. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Wet residue
Valves
Wet residue
Hydraulic Tank
Low fluid level
Hoses (Hydraulics)
Worn; weathered; chafed; lines capped
Cylinders
Seepage; rod chrome damage; residue
Cylinder Pins and Bushings
Worn
Limited Function Check
The hydraulic system was operational with wear and leaks during a limited check without a load.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Steering Wheel Play
Minimal
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Weak; held on slope
Limited Function Check (Brakes)
The brake system functioned, stopping and holding the machine. The park brake is weak
Frame Condition
Tire Size (4)
(F)12.5/80-18; (R)19.5L-24
Tire Condition
Cuts; gouges
Tread Depth (4 tires)
(RF) 21mm; (LF) 20mm; (RR) 25mm; (LR) 24mm
Wheel Condition
Wet residue on inner/outer hubs
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Dented; scratched
Chassis to Arm Pins
Residue
Tilt Linkage Pins and Bushings
Bucket to Arms Pins
Limited Function Check (rt machines)
The main chassis components were operational with wear during a limited check.
Boom Condition
Dented; scratched
Stick Condition
Dented; scratched
Stick Type
Extendable stick
Extendahoe Stick Guide
Visible slack; gouged; worn guides; greasy
Boom Lock (Backhoe)
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pin and Bushings Stick to Bucket
Outriggers
Street pads
Stabilizer Cylinders
Seepage; rod chrome damage; residue
Limited Function Check (Backhoe)
The hydraulic system was operational with wear, leaks, and damage during a limited check. There is wet residue from an unknown source on the underside of the unit and the king pin has visible movement.
Chassis #1
Specialty
Backhoe / Excavator Bucket Condition
23 1/2" rear bucket; worn; material residue
Forks
42" fold down forks
Loader Bucket Cutting Edge
Reversible; not turned; side edges worn
Loader Bucket Condition
90 1/2" loader bucket; dented; worn
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Oct 20, 2009
Oct 20, 2009
Silicon
9 PPM
6 PPM
Lead
0 PPM
46 PPM
Tin
1 PPM
5 PPM
Copper
2 PPM
17 PPM
Aluminum
5 PPM
4 PPM
Silver
0 PPM
0 PPM
Nickel
2.4 PPM
2.2 PPM
Chromium
0.5 PPM
0.2 PPM
Iron
38 PPM
39 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
Location: Maryland, United States
Zip/Postal Code: 21224
(Baltimore City County)
The purchase of this item is subject to Maryland sales tax unless certain conditions are met.
Hours: 8:00 am - 4:30 pm; Mon-Fri
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
888-433-5426
