• |
  • 888-433-5426
  • |
  • English
 Home Page / Search Results / 2005 Caterpillar 420D 4X4 Backhoe Loader
 

2005 Caterpillar 420D 4X4 Backhoe Loader (#233933)

[Email to a Friend] [View all items in this Public Auction]

SOLD!
Winning Bid: US $26,000  

 Sold on: 11/12/09
 # of Bids: 10
 Buyer From: Texas

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operator station, Cat 3054C engine, floor shift w/shuttle lever, 4x4, E-stick, 88" loader bucket, manual coupler, no rear bucket
Meter Reading: 3,462 Hours
Serial Number: FDP25475
Location: Arizona, United States
Zip/Postal Code: 85231
(Phoenix-Mesa area)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN FDP25475
CE Certification Label No
Paint The paint is faded, has scratches and chips.
Sheet metal (fiberglass) condition There are holes, dents, damage, and cracks in fiberglass hood and the sheet metal. There is surface rust in the paint loss areas.
Serial Number / VIN
 
Control Station
Hydraulic Controls The hydraulic control cover is missing.
Backhoe Control Configuration 2 Lever (Deere) style
Steps/Ladders The left side steps are bent.
Hand Rails
Mirrors
Glass Some of the glass is broken out.
Seats/Armrests The seat suspension and frame is broken and the cushion is torn and dirty.
Seat Belts
Horn Functional
Powertrain Controls
Steering Controls The steering wheel assist knob is missing.
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional The front lights are inoperable.
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer Functional; 3,462 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Disconnect Control
Limited Function Check (cs) The main components were functional with wear and damage. The forward/reverse lever has been changed.
Hour Meter/Odometer
 
Engine
Engine Make and Model Cat 3054C; Serial # CRS27972
Fuel Type Diesel
Emission Control Label Unreadable
Blow by @ idle (subjective observation) Visible
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator Low coolant level; Minor plugging of fins
Head Gasket Leaks None seen
Oil Leaks The front of the engine and the oil pan are leaking. There is heavy residue in the engine compartment from unknown source.
Fuel Leaks None seen
Cooling System Leaks Coolant leak at hose clamp.
Limited Function Check The engine was operational with leaks. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Leaks and heavy residue
Differential (front) The front differential input seal is dirty with oil residue.
Differential (rear)
Limited Function Check The drivetrain was operational with leaks. Due to the flat tire, the drivetrain was checked while the unit was raised in the air with the front bucket and outriggers. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves Leaks and residue
Hydraulic Tank Low oil level
Hoses (Hydraulics) Some hoses are weathered, chafed and frayed. There is some seepage and fitting leaks.
Cylinders Seepage; The bucket cylinder rod is pitted.
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system performed with wear and leaks.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Wear consistent with hours and age
Steering Wheel Play Minor
Brake Type Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Held against power
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4) 12.5/80 front; 19.5L-24 rear
Tire Condition The tires are worn and the right front is flat. There are cuts, plugs, and gouges throughout the tires.
Tread Depth (4 tires) RF 18 mm; LF 4 mm; RR 0 mm; LR 0 mm
Wheel Condition
Wheel Studs, Nuts, Lugs The right front has a lug nut missing.
Lift Arm Condition Cracks at lift arm lower pin bosses.
Chassis to Arm Pins Wear consistent with hours and age
Tilt Linkage Pins and Bushings Visible wear
Bucket to Arms Pins The pins show heavy wear.
Limited Function Check (rt machines) The loader components were operational with wear and damage.
Boom Condition Dented and scraped.
Stick Condition There is grease residue on the wear plates. There is excess space between the wear plates.
Stick Type Extendable stick
Extendahoe Stick Guide Heavy Wear
Boom Lock (Backhoe) Inoperable; Missing or broken components/plate
Boom Base Pin and Bushings Wear consistent with hours and age
Pin and Bushings Boom to Stick Wear consistent with hours and age
Pins and Bushings to Coupler Visible wear
Outriggers The street pads are worn.
Stabilizer Cylinders
Limited Function Check (Backhoe) There is no backhoe bucket and the system could not be totally checked.
Chassis #1
 
Specialty
Quick Coupler Manual coupler; not functionally tested.
Loader Bucket Cutting Edge Reversible-turned; Worn/damaged edge
Loader Bucket Condition 88" General purpose loader bucket; Worn thin; Dented
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Nov 03, 2009 Nov 03, 2009
Silicon 39 PPM 41 PPM
Lead 5 PPM 0 PPM
Tin 0 PPM 0 PPM
Copper 16 PPM 120 PPM
Aluminum 17 PPM 18 PPM
Silver 0 PPM 0.1 PPM
Nickel 3.5 PPM 0.1 PPM
Chromium 1.4 PPM 0.5 PPM
Iron 68 PPM 75 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Arizona, United States
  • Zip/Postal Code: 85231 (Phoenix-Mesa area)
  • The purchase of this item is subject to Arizona sales tax unless certain conditions are met.
  • Hours: LOADING HOURS: 8:30 am - 3:30 pm; Mon-Fri
  • Call at least one day in advance to schedule pickup.
  • Loading Dock Available.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...