• |
  • 888-433-5426
  • |
  • English
 Home Page / Category="Construction"; Type="Welders" / 2003 Caterpillar 420D 4x4 Backhoe Loader
 

2003 Caterpillar 420D 4x4 Backhoe Loader (#233928)

[Email to a Friend] [View all items in this Public Auction]

SOLD!
Winning Bid: US $31,000  

 Sold on: 11/12/09
 # of Bids: 63
 Buyer From: Mexico

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Enclosed cab w/heat and a/c, Cat 3054 engine, 4X4, floor shift w/shuttle lever, E-stick, 24" rear bucket, 88" loader bucket
Meter Reading: 1,834 Hours
Serial Number: FDP13298
Location: Arizona, United States
Zip/Postal Code: 85231
(Phoenix-Mesa area)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN FDP13298
CE Certification Label No
Paint The paint is faded, scratched, and chipped.
Sheet metal (fiberglass) condition There are dents and scrapes on the sheet metal. There is rust penetration in the sheet metal. The fiberglass hood is cracked. The bumper protectors for the radiator are damaged.
Serial Number / VIN
 
Control Station
Hydraulic Controls
Backhoe Control Configuration Excavator style w/control pattern changer
Steps/Ladders
Hand Rails
Mirrors
Glass
Seats/Armrests Damaged base boot
Seat Belts
Horn Functional
Powertrain Controls
Steering Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes; Some Inoperable
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer Functional 1,834 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Functional
Heater Functional
Disconnect Control
Limited Function Check (cs) The components that were checked functioned except as noted.
Hour Meter/Odometer
 
Engine
Engine Make and Model Cat 3054 engine Serial #: 7BJ27010
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System The muffler leaks around the clamp.
Radiator Dirty
Head Gasket Leaks None seen
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission 4 speed floor shift w/shuttle lever
Torque Converter Feels normal
Differential (front)
Differential (rear) Differential lock; Residue on housing
Final Drives
Limited Function Check The drivetrain functioned during a limited check without a load. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank Sight glass is cloudy.
Hoses (Hydraulics) Steel braid exposed and broken clamps
Cylinders
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system was operational during a limited check without a load.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Wear consistent with hours and age
Steering Wheel Play Minor
Brake Type Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Held against power
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4) 12.5/ 80- 18 front tires; 19.5 L-24 rear tires; Brands Armour and Goodyear
Tire Condition Cuts and gouges
Tread Depth (4 tires) RF 24 mm; LF 21 mm; RR 6 mm; LR 8 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins Wear consistent with hours and age
Tilt Linkage Pins and Bushings Wear consistent with hours and age
Bucket to Arms Pins Wear consistent with hours and age
Limited Function Check (rt machines) The main chassis components functioned during a limited check.
Boom Condition Scratched
Stick Condition Scratched
Stick Type Extendable stick
Extendahoe Stick Guide Minor wear; Dry
Boom Lock (Backhoe)
Boom Base Pin and Bushings Wear consistent with hours and age
Pin and Bushings Boom to Stick Wear consistent with hours and age
Pin and Bushings Stick to Bucket Wear consistent with hours and age
Outriggers Street pads; Dirt pads; The street pads are worn.
Stabilizer Cylinders
Limited Function Check (Backhoe) The main components were functional with minimal wear.
Chassis #1
 
Specialty
Backhoe / Excavator Bucket Condition 24" Rear bucket
Backhoe / Excavator Bucket Cutting Edge Teeth worn
Loader Bucket Cutting Edge Reversible-turned; Worn/damaged edge
Loader Bucket Condition 88" General purpose bucket; Dented
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Nov 03, 2009 Nov 03, 2009
Silicon 5 PPM 7 PPM
Lead 1 PPM 0 PPM
Tin 1 PPM 0 PPM
Copper 32 PPM 11 PPM
Aluminum 5 PPM 2 PPM
Silver 0.1 PPM 0 PPM
Nickel 0.9 PPM 0 PPM
Chromium 1.1 PPM 0.2 PPM
Iron 57 PPM 38 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Arizona, United States
  • Zip/Postal Code: 85231 (Phoenix-Mesa area)
  • The purchase of this item is subject to Arizona sales tax unless certain conditions are met.
  • Hours: LOADING HOURS: 8:30 am - 3:30 pm; Mon-Fri
  • Call at least one day in advance to schedule pickup.
  • Loading Dock Available.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...