1990 Mack RD690S T/A Dump Truck (IronPlanet Item #233794)

SOLD!

Winning Bid: US $11,500

• Sold on: 11/5/09
• # of Bids: 11 View Bid History
• Buyer From: New York

Bidders from California:

You must be a Vehicle Dealer to purchase this vehicle in California. Why?

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here

Features:	Conventional cab with heater, Mack EM6-300L diesel engine, 7 speed manual transmission, 12,860 lbs front axle capacity, 22,000 lbs capacity each rear axle, 11R-24.5 tires, 162"x96"x42" dump bed ~This item subject to storage fees of $100 per day if not removed after 30 business days following the close of auction. Item must be removed before end of 60 days after close of auction to avoid abandonment.

Meter Reading:	See Report
Serial Number:	1M2P198C0LM006646
Location:	Maine, United States Zip/Postal Code: 04901 (Kennebec County)
	Request shipping quote or additional assistance with transportation More Shipping Details
You may also be interested in these other items.

Inspection Report

Inspection Ratings Key
	New or recently replaced
	Performs within the tolerances expected for age and type of equipment
	Although performing, shows indication of needing repair or replacement
	Needs immediate repair/replacement. Requires work if it is to perform as expected

Protected by IronClad Assurance®

General Appearance

Serial Number / VIN		1M2P198C0LM006646
CE Certification Label		No
Paint		Faded; Scratches; Chips
Sheet metal (fiberglass) condition		Dents and damage; Surface rust in paint loss areas

Serial Number / VIN

Control Station

Mirrors
Glass		Some of the glass is scratched.
Seats/armrests		Vinyl seats; Torn
Seat Belts		Dirty
Horn		Air; Functional; The steering wheel horn is inoperable.
Oil Pressure		40 @ idle PSI
Exterior Lights Functional		Yes
Engine Warning Lights		Functional; Low air light only.
Travel Alarm		Functional
Gauges		Functional
Odometer Reading		Functional; 49,153 Miles - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Hour Meter /Odometer Reading		Functional; 5,895 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Indication of Additional Hours		There is a sticker on the odometer that states "Add to mileage 184,636"
Heater		Functional
Limited Function Check (cs)		The main components functioned during a limited check.

Odometer Reading

Engine

Engine Make and Model		Mack EM6-300L engine; Serial #: 9W 1181
Fuel Type		Diesel
Horsepower Rating		300 rated horsepower
Engine Brake		No
Emission Control Label		US EPA certification label
Blow by @ idle (subjective observation)		Visible
Starter
Turbo or Blower		Operational
Injector Pump		Operational
Exhaust System		Rusty
Radiator		Minor plugging of fins; The shroud is damaged on the right side.
Head Gasket Leaks		None seen
Oil Leaks		There is seepage on the side of the engine and residue on the side of the engine and the oil pan.
Fuel Leaks		None seen
Cooling System Leaks		Seepage from unknown source
Limited Function Check		The engine started and ran during a limited check. The engine was operational with leaks. See oil report.

Emission Control Label

Drivetrain

Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission		Residue
Transmission Leaks		None Seen
Clutch
Drive Line
Power Take Off		Leak; Residue
Differential (intermediate)		Residue
Differential (rear)		Differential lock; Residue
Limited Function Check (DT Vehicles)		The drivetrain was operational during a limited low speed check without a load.

Drivetrain #1

Hydraulics

Pumps (Hydraulics)		Leak; Residue; PTO driven
Valves
Hydraulic Tank		Residue
Hoses (Hydraulics)		Weathered
Cylinders		Residue
Cylinder Pins and Bushings		Wear consistent with hours and age
Limited Function Check		The hydraulic system performed with wear as noted during a limited check without a load.

Hydraulics #1

Chassis - Heavy/Highway

Steering Linkage		Wear consistent with hours and age
Steering Wheel Play		Minor
Brake Type		Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake		Held on slope; Held against power
Limited Function Check (Brakes)		The brake system functioned, stopping and holding the machine.
PTO		Leaking; Functional; Drives hydraulic pump
Springs/Hangers Condition		Loose/broken brackets
External Electrical / Air Connections
Wheel Base: (Front axle to center of rear tandems)		15' 10"
Front Axle Capacity		12,860 lb. capacity front axle
Rear Axle Capacity		22,000 lb. capacity rear axles
Frame Condition		Doubled / re-enforced
Tire Size		11R-24.5 Tires; Brand(s): Bridgestone; Continental;Sumitomo; Yokohama; Hankook; and Goodyear
Tire Condition		Cuts; Gouges
Tread Depth		RF 7 mm; LF 4 mm; RMO 4.3 mm; RMI 2 mm; LMI 8 mm; LMO 2 mm; RRO 5.1 mm; RRI 3.6 mm; LRI 3.5 mm; LRO 1.5 mm
Wheel Condition		Steel; Bent; Rusty
Wheel Studs		Missing lugs/nuts; Left intermediate wheel missing 1 lug wedge and nut

Chassis - Heavy/Highway #1

Chassis

IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Dump Bed/Box dimensions		162" length; 96" width; 42" height bed
Bed Box		Minor dents; Wash boarding between supports; Surface rust; Weld repairs
Bed Liner		No
Tailgate		Surface rust; Dents
Tailgate Latch
Floor Plate		Washboarded; Surface rust
Support Frame		Weld repair
Hinge Points		Wear consistent with hours and age
Lift Cylinder / Cylinders
Limited Function Check		The main chassis components functioned with minor to moderate wear in the pivot points.

Chassis #1

Oil Sample Analysis	Engine
date of analysis	Oct 23, 2009
Silicon	3 PPM
Lead	0 PPM
Tin	0 PPM
Copper	5 PPM
Aluminum	0 PPM
Silver	0 PPM
Nickel	0 PPM
Chromium	0.4 PPM
Iron	26 PPM
Glycol	NEG
Water	NEG
Fuel	<5%

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details

Request shipping quote or additional assistance with transportation

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

Location: Maine, United States
Zip/Postal Code: 04901 (Kennebec County)
The purchase of this item is subject to Maine sales tax unless certain conditions are met.
Hours: 8 - 4 Mon - Fri
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...

1990 Mack RD690S T/A Dump Truck (#233794)